User manual RCA RS2041

[. . . ] RS2041-EN 1/19/04 9:45 AM Page 2 IMPORTADOR Comercializadora Thomson de México, S. A. Delegación Cuauhtémoc C. P 06700. Telefono: 52-55-11-020360 RFC: CTM-980723-KS5 EXPORTER Thomson Inc. Box 1976 Indianapolis, IN 46206-1976 © 2004 Thomson Inc. [. . . ] Press PROG/SET repeatedly to view each track assignment in the program list. Repeat Press REPEAT to repeat the current track (REPEAT 1), current disc (REPEAT 1 DISC) , all discs (REPEAT ALL DISC), or turn repeat mode off (ALL DISC). Edit Program List 1. Follow "Display Program List" steps until the location to be edited is displayed. Repeat steps 2 to 4 under "Setting Up a CD Program " to edit the track to store into memory. Note: You may also press REPEAT to select 1 disc or all discs before activating SHUFFLE function. Deleting Program List While in PROGRAM mode, press and hold STOP for 3 seconds. They system displays the message CLEAR. Setting Up a CD Program You can program the CD player to play up to any 32 tracks on the CDs in the tray. While the CD player is stopped, press PROG/SET to enter program mode. The system displays the next available program number 00 P:01. Press the corresponding disc number or DISC SKIP on the main unit to select disc. Press SKIP BACKWARD / SKIP FORWARD on the main unit or TUNING or on the remote control to select track to enter into memory. Repeat steps 2 to 4 to store more tracks into program memory. Tips: · You can create a program of up to 32 tracks. · Press CD INFO repeatedly to view elapsed track time, track number, track remain time and disc remain time. Attention: Do not push to force closing of the tray during CD playback or tray opening. 9 RS2041-EN 1/19/04 9:46 AM Page 15 Radio Selecting Tuner Band 1. Press SOURCE on the main unit or TUNER on the remote control to enter Tuner mode. Press BAND to select between AM or FM Radio band. Auto Preset Programming (FM Only) Press and hold BAND button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered. EN Tips: Your audio system has 32 preset stations. Manually Setting Presets Tuning to a Station Press SKIP BACKWARD / SKIP FORWARD on the main unit or TUNING or on the remote control to select frequency. Press SKIP BACKWARD / SKIP FORWARD to access the desired frequency. The most recently accessed program location will flash on the display. If a different program location is preferred, press SKIP BACKWARD or SKIP FORWARD on the main unit or PRESET or on the remote control to move to the desired preset number (1-32). Press PROG/SET to store the selected frequency at that preset. Using Presets The tuner can be in either TUNE or PRESET mode. When in preset mode, · Press TUNE/PRESET on the main system or PRESET or on the remote control to access the previous or next preset station. · The display first shows the preset program number and after a few seconds, the preset program and frequency will be displayed. Suppressing Stereo Signal Press ST/MONO on the main unit or FM ST. on the remote control to toggle between FM mono and stereo for stereo FM stations. PR 01 FM PROG 07 87. 90 MHz 10 RS2041-EN 1/19/04 9:46 AM Page 16 Troubleshooting Tips EN Problem Solution System will · Check power cord for a secure not turn connection. [. . . ] To identify your nearest Authorized RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. · Show the Authorized Service Center Representative your evidence of purchase date or first rental. · Pick up your unit when repairs are completed. · Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. [. . . ]