User manual REMINGTON 6250

[. . . ] Please read these instructions carefully and keep them safe. A IMPORTANT SAFETY INSTRUCTIONS 1 WARNING ?TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY TO PERSONS: 2 Use this appliance only for its intended use described in this manual. 3 Do not use if it is damaged or malfunctions. [. . . ] The device uses the hair under your skin to disable your hair at the root, so it is not effective if the hair has been pulled out. ? DO NOT use directly over or near Active Implantable Medical Devices such as implantable pacemaker, internal defibrillator, or insulin devices. Although no problems associated with the use of this device have been reported during clinical studies, it is recommended to observe all active implantable medical device warnings regarding the use of electronic devices to prevent any failure or interruption of an active implantable device. 8 ENGLISH GB C PREPARING FOR USE , Familiarise yourself with the features of your new i-LIGHT device. , Flash Window with built-in UV skin protection ? WARNING: always inspect the Flash Window before use to ensure there is no damage to the lens. ? WARNING: always clean the Flash Window before use with the lint-free cloth provided to ensure there is no oil or debris on the lens. , Skin Contact Sensors ? This safety mechanism prevents accidental flashing. The device will not flash unless both Skin Contact Sensors are in full contact with the skin. , Flash Button ? The Flash Button is located on the hand piece. 9 SK P FIN S DK I E F NL ? Do not use over or near anything artificial such as silicon implants, Implanon contraceptive implants, pacemakers, subcutaneous injection ports (insulin dispenser) or piercings. ? Wireless communications equipment may affect the i-LIGHT device and should be kept at least 3. 5) D ENGLISH 1 Place the i-LIGHT hand piece against your skin so the Flash Window is flush with the skin surface. 2 Ensure the Skin Contact Sensors are fully engaged and the Bulb Status Indicator Display is illuminated green (Fig. 7 3 Press the Flash Button to deliver a flash. Move the device to a different spot and flash the i-LIGHT one more time. Repeat this process until you find the setting that feels right for you. ? Wait 24 hours and then look at the test area. If the skin appears normal, proceed with your first full treatment at the energy level you determined is right for you. , NOTE: You must test the device on each area of the body you wish to treat. C TREATMENT ? Multi-Flash Mode: The i-LIGHT device will flash when the Flash Button is pressed and will continue to flash every 3 seconds when the skin contact sensors are fully engaged. The Multi-Flash mode allows you to quickly treat large areas by simply gliding the hand piece over the skin after each flash. , How to treat: ? Place the Flash Window firmly against the skin - ensure the Skin Contact Sensors are fully engaged. [. . . ] There have not been any reported side effects or skin damage from long term use of intense pulse light (IPL) Why is my hair growing despite treatments? results aren?t immediate , and individual results vary. Most users will begin to notice fewer hairs within 1-2 weeks after beginning treatment. During this time it may look like the hair is still growing, but it is actually being ?pushed out?. [. . . ]