User manual REMINGTON 715

[. . . ] Always make sure blades are aligned properly. Always attach plug to appliance, then adapter to outlet. To disconnect, turn all controls to OFF, then remove adapter from outlet, then detach power cord from the appliance for storage. Do not use an extension cord or a voltage converter with this appliance. [. . . ] sewing machine oil), simply spread 1-2 drops lightly over cutters with fingertip. Use only light-grade oils as these will not evaporate nor slow down speed of cutting blades. Do not use hair oil, grease, or any oil mixed with kerosene nor solvent as these too will evaporate. 8. Separate the handle end of the unit from the attachment end at the remaining chrome ring. Using wire cutters disconnect the battery from the circuit. Remove battery and insulate battery ends by (1) placing battery into a plastic bag or (2) covering the terminals of the battery with plastic or non-conductive electrical tape. Dispose in accordance with state and local regulations. CAUTION: THESE NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR DISPOSED OF IN ACCORDANCE WITH STATE AND LOCAL REGULATIONS. Do not burn or mutilate, as they may burst or release toxic materials. Do not shortcircuit, as this may cause burns. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life when taken out of services in the United States or Canada. The Vertical Comb can be used in any of the three length settings by sliding the comb in the grooves on the trimmer or the comb can be removed for a close trim. Cleaning, Care & Maintenance Always clean Grooming System attachments regularly to ensure maximum performance and a proper operating life. The trimmer is washable so it can be used in the shower or rinsed under water during cleaning. Therefore, to maintain performance of cutters, oil after rinsing. Cleaning Cautions The handheld unit should be detached from the power supply cord before cleaning. Only the attachments and combs may be removed for cleaning. Cleaning should be done with a soft brush. Only use a light-grade oil like sewing machine oil. These oils will not evaporate or slow down the blades. Do not use harsh or corrosive cleaners on the units or their cutters. Do not apply pressure or hard objects to cutters. CLEANING TRIMMER ATTACHMENTs WITH BRUSH / WATER Thoroughly brush and blow out hair clippings from cutter system, attachment, and handle. [. . . ] If the product should become defective within the warranty period, we will replace it free of charge. Return your product and sales receipt with your name, address and day time phone number to: Spectrum Brands, Inc. , Attention: Consumer Services, 601 Rayovac Drive, Madison, WI 53711. KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES. This warranty does not cover products damaged by the following: Accident, misuse, abuse or alteration of the product Servicing by unauthorized persons Use with unauthorized accessories Battery Removal NOTE: Always recycle or properly dispose of batteries according to Local and State requirements. [. . . ]