User manual REMINGTON DA-757

[. . . ] How to get a great shave from your Remington ® MicroScreen® 2 Shaver Thank you for buying this premium shaver from Remington ®. Inside you'll find tips on using and caring for your shaver to get the best shave possible. When using an electrical shaver, basic precautions should always be observed, including the following. Read all instructions before using this shaver. [. . . ] Wait at least 15 minutes after rising to allow the puffiness that most men experience upon waking to disappear. Make sure your face is clean and dry before starting. To help maximize your shaver 's performance, consider using the Remington ® Pre-Shave Powder Stick (SP-5). It absorbs moisture and facial oils, helping set up the hairs so they enter the cutting chamber more easily. It makes shaving quicker and more comfortable. The trimmer on your Remington® MicroScreen® 2 Shaver is easy to maintain. S When you clean your shaver, just brush off any clippings that may accumulate around the trimmer Assembly. Using the longer bristles on the brush supplied will enable you to get into the area between the trimmer and the shaver. S Every six months, lubricate the trimmer teeth by applying a drop of light machine oil one-third and two-thirds of the way along the blade. Using your finger tip, spread the oil along the teeth, and run the trimmer for a few seconds. Before operating your MicroScreen® 2 Shaver, remove the Headguard, which protects the Foils and Cutter Assembly. Because they are subject to daily use, the cutters and foils of your Remington® MicroScreen® 2 Shaver will wear and eventually require replacement to maintain a close, comfortable shave. Depending on your shaving technique and habits, the foils will usually last six months; the cutters, one year. Some signs that your foils and cutters need replacing are: s Irritation. As foils get worn, you may notice your skin feeling sensitive after a shave, particularly when you apply aftershave. As cutters wear, your shave may not feel as close, and you may feel your shaver is pulling at your whiskers. You may notice that the cutters have worn through the foil. To order replacement foils and cutters, call 1-800-736-4648. To prevent inadvertent damage to the Foils and Cutter Assembly, do not attempt to remove them unless you are replacing them. To remove the old foil and cutters follow the instructions that come with the foil and cutter replacement package. It's always a good idea to replace the foils when you replace the Cutter Assembly. Model DA-307 and DA-325 With the shaver unplugged, press in on the Switch Lock and slide the ON/OFF button upward to turn ON. [. . . ] Model DA-57, and DA-107 Connect cord to shaver and then to electric outlet. Do not burn or mutilate, as they may burst or release toxic materials. Do not short-circuit, as it may cause burns. You have just bought one of the finest shavers available today. [. . . ]