User manual REMINGTON S-5521

[. . . ] Do not use outdoors or operate where aerosol (spray) products are being used, or where oxygen is being administered. Do not let eyes or bare skin touch heated surfaces. Do not place the heated unit directly on any surface while it is hot or plugged in. The plug on this appliance has one blade wider than the other, it is a polarized plug. [. . . ] Because the unit is already hot, it may take a few minutes to cool off. Take a small section of hair, pull hair down and away from your scalp, and hold it taut. Starting at the roots, clamp hair firmly between the plates and run the styler down the entire hair strand, from root to tip, in one smooth stroke. Do not hold it in one area for a long period of time or damage to hair may occur. To create curves or flicks, rotate your wrist to turn the iron in toward your head or out away from your head as you run the iron down the hair strand. Repeat with all the sections of your hair, working with the underneath layers first, then the top and sides. 10. When you are finished styling, press and hold the ON/OFF button to turn the unit off, unplug it, and allow it to cool before storing. NOTE: DUAL VOLTAGE APPLIANCE Confirm the voltage available at each overseas location before using the appliance. For connection to a 240-volt supply, use an attachment plug adapter of the proper configuration for the power supply receptacle. MAINTENANCE Cleaning Make sure the unit is unplugged and cool. Use a damp cloth to clean the plates and the outside of the power handle. No other maintenance of the unit is required. This appliance has no user serviceable parts. +/- Button Features Set to desired temperature setting. During heat up time, the LCD blue temperature display will pulse from, 0 to 3 bars until the desired temperature is reached. When the tool reaches the desired temperature, the pulsing will stop and the correlating bars (1-3) will be displayed. Turbo Mode: (hold time about 2 seconds) ­ Activating: Press "+" Button and hold about 2 seconds to increase temperature to maximum 410°F setting. ­ Decreasing: Press "-" Button to decrease the temperature like the normal function mode. Lock Mode: - Activating: Press and hold "-" button for about 3 seconds. All the keys will be locked and the LCD will display the lock symbol. ­ Unlocking: Press and hold "-" button for about 3 seconds. All the keys will be unlocked and the lock symbol will disappear. 390°-410°F Hair Type Very fine, fragile, damaged hair Normal, easy to straighten hair Thick, difficult to straighten hair Storage SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. [. . . ] This warranty does not cover products damaged by the following: Accident, misuse, abuse or alteration of the product Servicing by unauthorized persons Use with unauthorized accessories Connecting it to incorrect current and voltage Wrapping cord around appliance causing premature wear & breakage Any other conditions beyond our control No responsibility, obligation, or liability is assumed for the installation or maintenance of this product. Automatic Safety Shutoff Hinge Lock After approximately one hour, the unit will automatically shut itself off. To reactivate the unit, press the ON/OFF switch. This professional flat iron has a closing lock to make the unit easier to store. To lock the iron, simply squeeze the plates together and turn the switch to the locked position. [. . . ]