User manual REMINGTON S-8601

[. . . ] Do not let eyes or bare skin touch heated surfaces. Do not place the heated unit directly on any surface while it is hot or plugged in. The plug on this appliance has one blade wider than the other, it is a polarized plug. As a safety feature, this plug will fit in a polarized outlet only one way. [. . . ] While the LCD is flashing, simply press the +/- button to use the styler for another 60 minutes. If no button is pressed, the unit will turn itself off when the LCD stops blinking. Usage Tips nOTe: Please see "Wet/Dry Setting" to the left. 10. When you are finished styling, press and hold the on/off button to turn the unit off, unplug it, and allow it to cool before storing. Use this curved plate styler to create volume, curves and flips: Volume: For volume at your roots, glide the styler through your hair by first lifting up and away from the scalp and then through the rest of the hair strand. curves: For curved-under looks, glide the unit through the hair strand as described above, turning the styler under as you reach the ends of your hair. Flips: For flipped-out looks, glide the unit through the hair strand as described above, turning the styler outward as you reach the ends of your hair. nOTe: Hold the straightener with the display and steam vents facing away from your scalp. Straightening Your Hair Use with unauthorized accessories Connecting it to incorrect current and voltage Wrapping cord around appliance causing premature wear & breakage Any other conditions beyond our control How To Use Styler Settings Take extra care when using a professional styler. To prevent hair damage, make sure to use the correct settings for your hair type. Wet/Dry Setting D E This styler can be used on wet or dry hair. Please turn the wet/dry setting on/off with the button on the side of the unit. C The setting should be "on" for use on wet hair and "off" for use on dry hair. (See table below. ) The display will turn blue B and show a steam cloud when this setting is on. A F G Fine Dry A [1-4] Dry, fine, fragile, or damaged hair B [5-8] Dry, normal to thick, easy to straighten hair c [9-12] Dry, very thick, difficult to straighten hair Damp D [13-16] Damp, fine to normal, easy to straighten hair Wet F [21-25] Wet, fine, fragile, or damaged hair normal Thick e [17-20] Damp, thick, difficult to straighten hair G [26-30] Wet, normal to thick hair 1. Gently towel dry hair to remove excess water. Avoid rubbing hair with a towel, as this creates split ends and frizziness. Plug the straightener into an electrical outlet. Press and hold the on/off button until the unit turns on and the digital display begins flashing. The straightener will initially heat to setting 15. Adjust the temperature using the +/buttons. The bars on the display will flash while the unit heats up, then glow steadily when the unit has reached the selected temperature. The styler will beep three times when it is ready for use. Turbo Boost: (hold time about 2 seconds) -To activate: Press "+" button and hold about 2 seconds to increase temperature to maximum 400°F setting instantly. -To release: Press "-" button to decrease the temperature. Divide hair into manageable sections and clip the upper layers on top of your head and out of the way. Test the styler on a small section of hair, then adjust the temperature up or down before styling the rest of your hair. nOTe: If you find that you need a higher setting while straightening your hair, simply adjust the temperature by pressing the "+" button. [. . . ] by: Spectrum Brands Canada, Inc. , Mississauga, ON L5L 0A1 ® Registered Trademark and TM Trademark of ROVCAL, Inc. 03/10 Job #CS37038 Warranty Spectrum Brands, Inc. warrants this product against any defects that are due to faulty material or workmanship for a two-year period from the original date of consumer purchase. This warranty does not include damage to the product resulting from accident or misuse. [. . . ]