User manual REMOTEC HTM1000

[. . . ] Your Home Theatre Master 1000 (HTM1000) is a state-of-the-art device which integrates many different infrared remote controls to deliver instant A/V action to your fingertips. We hope that you love this remote and take it as your Personal Digital Assistant for your Home Theatre system. Before operating the remote, please read thoroughly this manual. Device mode keys (for device mode selection) Function keys (for remote operation) MUTE key (for TV volume shut down) SHIFT key (for secondary function) PAGE key (for next group function keys) Quick set up by code entering and library code search · Operation System: Compatibility: Integrated preprogrammed & learning infra-red remote control system Preprogrammed with code library of Televisions (TVs), Video Cassette Recorders (VCRs), Satellite / Digital Satellite Receivers (SATs), Cable Converters (CBLs) and Digital Video Disc Players (DVDs) 226 learning commands Non-volatile and permanent memory Negative touch screen LCD Bright-blue EL backlight 8 metres (25 feet) 4 x AAA size batteries (Alkaline is recommended) 163 x 54 x 19. [. . . ] When you finish the whole device mode, press the same device mode key (e. The indicator will flash twice and then turn off. There are in maximum of 42 squares within 3 pages which are available to be learnt for each device mode. In case you would like to learn more than 42 commands per each device, you can make use of " SHIFT " function to obtain additional 3 more pages in order to obtain additional 42 free learning spaces under " SHIFT " platform. For detail explanation of how to use the " SHIFT " function, please refer to section " 5. If you found a learned command work for your A/V equipment only occasionally, your original remote control may contain dual signals. Try the following steps to reprogram this command:­ 1. Press and release a desired key on the HTM1000 you want to hold the command. Press and hold the corresponding key on your A/V remote control to transfer the command. The indicator will flash once and the device mode key icon (e. The first signal has been transferred successfully and you can release the key on the A/V remote control. Press and hold the same corresponding key on your A/V remote control until the indicator will flash once and the device mode key icon (e. Repeat steps 2 to 5 of this procedure to transfer other signals if there is any. When finished, press the same device mode key again to store your setting. Warning: Entering a new preprogrammed device code will automatically erase and replace all learned commands in the chosen device mode. Your HTM1000 is factory preprogrammed to operate your TVs, VCRs, SATs, CBLs & DVDs. Due to the limited number of key, some minor functions may not be included. You may teach your remote with the original A/V remote to operate any excluded function by your choice. Besides the preprogrammed devices, you may also teach the remote to operate other infra-red controlled equipment and appliances, such as HiFi or air-conditioners, etc. Your HTM1000 can learn and reproduce up to 226 commands from other remote controls. All 5 device modes (TV, VCR, DVD, SAT, CBL) can be taught to operate additional commands:­ 1. Hold down " P+ " & " VOL­ " on the remote together simultaneously for 3 seconds until the indicator lights up. [. . . ] You can simply tap the " Page " key on the right bottom corner of the remote panel to turn to another command group. " SHIFT " function allows you to obtain additional learning space for each device mode. There are 3 pages for each default device mode. Through using " SHIFT " key, you can access the 4th, 5th and 6th pages. [. . . ]