User manual REVEL PERFORMA PEDESTAL 22 ASSEMBLY INSTRUCTIONS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual REVEL PERFORMA PEDESTAL 22. We hope that this REVEL PERFORMA PEDESTAL 22 user guide will be useful to you.
Lastmanuals help download the user guide REVEL PERFORMA PEDESTAL 22.
Manual abstract: user guide REVEL PERFORMA PEDESTAL 22ASSEMBLY INSTRUCTIONS
Detailed instructions for use are in the User's Guide.
[. . . ] Performa Pedestal 22 Assembly Instructions
3 Oak Park Drive, Bedford, MA USA 01730-0413 | Tel: 781-280-0300 | Fax: 781-280-0490 | www. revelspeakers. com | 12/03 | Part No. [. . . ] Thread spikes about halfway and then use a wrench or pliers to tighten the locking nuts. Tighten all screws again after stand is fully assembled. Turn stand upright and adjust spikes if required.
Top Plate (Rear) Wire Access Hole
(3) 6mm x 18mm flat head screws
Lock Nut There are different size threads on each end of the tube(s). Make sure that the end attached to the top plate properly fits the 6mm x 18mm screws before attempting to tighten. It is not possible to attach the wrong end to the top plate, as the threads at the bottom end will not fit the 6mm x 18mm screws.
Spike
Bottom Base
(1) Large Tube (2) Smaller Tubes
Step 3: Place the stand upside-down and install the bottom base with three 8mm x 20mm hex cap screws using the Allen wrench (included).
Step 5: Place the Revel Performa M22 loudspeaker as shown onto a carpeted surface or a soft towel. Attach the assembled stand with four 8-32 x 3/4 Phillips flat head screws.
(3) 8mm x 20mm hex cap screws Bottom Base
The large tube and bottom base feature wire access holes through which speaker wires can be threaded and concealed from view. [. . . ] Bottom Wire Access Hole
Revel Performa Pedestal 22 (Assembled)
If wires are not threaded through the tube, use the plugs to seal the wire access holes.
(4) 8-32 x 3/4" flat head screws
(Start All Screws By Hand Before Tightening With Screwdriver)
(Front) M22 Loudspeaker
Top Wire Access Hole
Top Plate (Rear) [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE REVEL PERFORMA PEDESTAL 22
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual REVEL PERFORMA PEDESTAL 22 will begin.
