User manual RICOH AFICIO 1018

[. . . ] Operating Instructions Copy Reference ZENH010E. eps Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. Type for Aficio 1015/1018/2515/2518/1502/1802 Printed in China UE USA B039-7207 Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. [. . . ] See "6. SADF Auto Reset"in P. 62 "Settings You Can Change with the User Tools". For ADF, the paper size that can be set with this function is vertical 105­297mm, 4" × 12", horizontal 128­1, 260mm, 5" × 50". The maximum copy paper size is 297 × 432mm, 11" × 17". You cannot use the Auto Paper Select function with this function. A Set one original face up into the document feeder. B Press the {Select Paper Tray} to se} lect your desired paper tray or bypass tray. 23 Copying Selecting paper from a paper tray A Press the {#} key. } D Enter the vertical size of the original with the number keys, then press the {OK} or {#} key. } } 2 B Enter the horizontal size of the original with the number keys, then press the {OK} key. } C Enter the vertical size of the original with the number keys, then press the {OK} or {#} key. } } Selecting paper from the bypass tray A Press the {#} key. } B Press the 0 or 1 key until "3. Custom Orig. Size" is displayed, then press the { OK} } key. C Enter the horizontal size of the original with the number keys, then press the {OK} key. } 24 Basic Functions Basic Functions The following basic functions are explained in this section. Adjusting Copy Image Density You can adjust the copy image density to match your originals. If you require darker or lighter copies, adjust the image density yourself. Adjusting Copy Image Density Selecting an Original Type Text and Photo Selecting Copy Paper Auto Paper Select and Manual Paper Select Auto Reduce/Enlarge The machine can choose an appropriate reproduction ratio based on the paper and original sizes you select. Note You can select functions to be activated when System Reset is turned on, when Energy Saver is turned off, or after the machine is powered on. See P. 62 "Copier Features". 2 A Press the {Lighter} or {Darker} key } } to adjust the image density. You can change default settings for basic functions. See P. 62 "Settings You Can Change with the User Tools". Selecting an Original Type There are two ways to match your originals: Text If you do not select either mode, your originals will be scanned with the settings suitable for text originals (Text mode). Photo Delicate tones of photographs and pictures can be reproduced with this mode. Note You can change the detailed settings for Text and Photo each with the User Tools. See P. 62 "Settings You Can Change with the User Tools". 25 Copying A Press the {Original Type} key and } select the original type. Manual Paper Select You can select the desired copy paper size manually. You can also select the bypass tray. Reference See P. 31 "Copying from the Bypass Tray". Note When you use Auto Paper Select, refer to the following table for possible copy paper sizes and directions (if the ratio is 100%). 2 Note Press the {Original Type} key to step through the following types: Upper indicator lit Text Lower indicator lit Photo Metric version Where original is set Exposure glass Paper size and direction A3 L, B4JIS L, A4 KL, B5JIS K, 81/2" × 13" L Selecting Copy Paper There are two ways to select copy paper: Document feeder A3 L, B4JIS L, A4 KL, B5JIS KL, A5 KL, 81/2" × 13"L Auto Paper Select The machine selects a suitable size of copy paper automatically based on the original size and the reproduction ratio. Note When the original is set at a different direction from the copy paper in the paper tray the machine automatically rotates the original image by 90° to match the copy paper direction (Type 1 requires the optional 16MB copier memory unit). This applies to the following paper sizes: Metric version Inch version A4 KL, B5JIS KL, A5 KL 81/2" × 11" KL, 51/2" × 81/2"KL (document feeder) Inch version Where original is set Exposure glass Paper size and direction 11"× 17"L, 81/2" × 14" L, 81/2" × 13" L, 81/2" × 11" KL Document feeder 11"×17"L, 81/2" × 14" L, 81/2" × 13" L, 81/2" × 11" KL, 51/2" × 81/2"KL For some originals, the original size might not be detected correctly. See P. 11 "Sizes Difficult to Detect". If you specify all papers trays as containing special paper, you cannot use the Auto Paper Select function. 26 Basic Functions A Select the copy paper. Auto Paper Select A Make sure that "Auto Paper" (Auto Paper Select) is selected. Original orientation Paper orientation Rotates the image and copies it R R GCROTA0E 2 Manual Paper Select A Select the paper tray or bypass tray by pressing the {Select Paper Tray} key. } Limitation You cannot use the Rotated Copy function when enlarging onto B4JIS or A3 size paper. In this case, set your original in the landscape direction. You cannot rotate: Original Size and Direction A4, B5JIS, or A5 portrait *1 However, you can rotate: A4, B5JIS, or A5 landscape when enlarging to Copy paper Size and Direction B4JIS, A3 *1 when enlarging to B4JIS, A3 - Rotate Copy (Type 1 requires the optional 16MB copier memory unit) If the direction in which your original is set (landscape or portrait) is different from the paper you are copying onto, this function rotates the original image by 90° and fits it on the copy paper. [. . . ] · Areas with corrosive gases. Power Connection R WARNING: · Only connect the machine to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extension cord. · Do not damage, break or make any modifications to the power cord. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire. R WARNING: · Unplug the power cord from the wall outlet before you move the equipment. [. . . ]