User manual RICOH AFICIO1013F

[. . . ] RICOH COMPANY, LTD. 15-5, Minami Aoyama 1-chome, Minato-ku, Tokyo 107-8544, Japan Phone: +81-(0)3-3479-3111 1013/1013F Operating Instructions 1013/1013F Operating Instructions Copy Reference Copy Reference Overseas Affiliates U. S. A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B. V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. Ricoh House, 1 Plane Tree Crescent, Feltham, Middlesex, TW13 7HG Phone: +44-(0)20-8261-4000 Germany RICOH DEUTSCHLAND GmbH Mergenthalerallee 38-40, 65760 Eschborn Phone: +49-(0)6196-9060 France RICOH FRANCE S. A. [. . . ] To avoid a multi-sheet feed, shuffle the originals before setting them in the document feeder (ADF). Placing Standard Size Originals Note When the copy paper size and the original size differ, follow the steps below. } A Press the {Menu} key. Reference Regarding originals that the document feeder (ADF) can handle, see p. 10 "Originals". A Adjust the guide to the original size. B Place the aligned originals face up into the document feeder (ADF). B Press the 0 or 1 key to select "3. Original Size", and then press the {OK} key. } Note You can also enter this mode by pressing the {R/#} key. } When the bypass tray is selected, the {R/#} key does not work } to enter this mode. 1. Document guide 20 Placing Originals C Make sure that "Standard Size" is selected, and then press the {OK} } key. Placing Custom Size Originals Limitation Enter the size of your original if it is not one of the following: A4L, A5KL, 8 1 / 2 " × 14"L, 8 1 / 2 " × 13"L, 8 1 / 2 " × 11"L, 5 1 / 2 " × 81/2"KL, 8" × 13"L, 81/4" × 13"L, 81/4" × 14"L For exposure glass, the paper size that can be set with this function is vertical 105­216mm, 4. 1"­8. 5", horizontal 128­297mm, 5"­11" For document feeder (ADF), the paper size that can be set with this function is vertical 140­216mm, 5. 5"­8. 5", horizontal 140­356mm, 5. 5"­14". For exposure glass, the maximum copy paper size is 210 × 297mm, 81/2" × 11". For document feeder (ADF), the maximum copy paper size is 216 × 356mm, 81/2" × 14". Note If not, press the 0 or 1 key to select it. 2 D Press the 0 or 1 key to select original size, and then press the {OK} key. } E Press the {Select Paper Tray} key to } select your desired tray. A Place one original face down on B Press the {Menu} key. } Note Select the same size and direction copy paper as the original. the exposure glass or face up into the document feeder (ADF). F Press the {Start} key. } 21 Copying C Press the 0 or 1 key to select "3. Original Size", and then press the {OK} key. } 2 Note You can also enter this mode by pressing the {R/#} key. } D Press the 0 or 1 key to select "Custom Size", and then press the {OK} key. } E Enter the horizontal size of the original with the number keys, and then press the {OK} key. } F Enter the vertical size of the original with the number keys, and then press the {OK} key. } G Press the {Select Paper Tray} key to } select your desired paper tray. H Press the {Start} key. } 22 Basic Functions Basic Functions Note You can select functions to be activated when System Reset is turned on, when Energy Saver is turned off, or after the machine is powered on. See p. 56 "Settings You Can Change with the User Tools". You can change default settings for basic functions. See p. 56 "Settings You Can Change with the User Tools". Selecting an Original Type There are two ways to match your originals: Text If you do not select either mode, your originals will be scanned with the settings suitable for text originals with this mode. Photo Delicate tones of photographs and pictures can be reproduced with this mode. Note You can change the detailed settings for Text and Photo each with the User Tools. See p. 56 "Settings You Can Change with the User Tools". 2 Adjusting Copy Image Density You can adjust the copy image density to match your originals. If you require darker or lighter copies, adjust the image density yourself. A Press the {Lighter} or {Darker} key } } to adjust the image density. A Press the {Original} key, and then } select the original type. Note Press the {Original} key to step } through the following types: Upper indicator lit Text Lower indicator lit Photo 23 Copying Selecting Copy Paper You can manually select the paper tray for the paper size you wish to use. 2 A Select the paper tray or bypass tray by pressing the {Select Paper Tray} key. } 24 Sort Sort The optional 32MB copier memory unit is required to use this function. [. . . ] Connect the power cord directly into a wall outlet and do not use an extension cord. · Do not damage, break or make any modifications to the power cord. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire. R WARNING: · Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. [. . . ]