User manual RICOH AFICIO120

[. . . ] Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=80 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 3. 200000 mm Operating Instructions Copy Reference Type for 2512/1202/5612/Aficio 120 Printed in China UE USA B045-7267 For safety, please read this manual carefully before you use this product and keep it handy for future reference. Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=80 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 3. 200000 mm Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information in the Copy Reference before using this machine. [. . . ] Quick Dial keys Use to dial numbers at a single touch or to enter letters and symbols. Also use for the Group Dial function. 9. LCD display This guides you through tasks and informs you of the machine status. A message appears here. 4 StellaCEN-basic_V4_FM. book Page 5 Thursday, July 19, 2001 1:39 PM Control Panel 18. User Function keys Each of these can be programmed for rapid access to frequently used functions. 25. Number keys Use to dial fax numbers or enter the number of copies. Functions Programmed by Default Key F1 F2 F3 Function Manual Reception Reception Mode Print Journal 26. {Start} key } Press to start all tasks. 1 27. Operation switch Press this switch to turn the power on (the On indicator goes on). To turn the power off, press this switch again (the On indicator goes off). 19. {Resolution} key } Press to switch between Standard, Detail and Fine. When the indicator is not lit, Standard is selected. 20. {Memory Trans. } key } Press this key to toggle between Memory Transmission ( Memory Trans. ) and Immediate Transmission ( Immediate Trans ) modes. When the indicator is not lit, Immediate Transmission is selected, and when the indicator is lit, Memory Transmission is selected. 21. {Pause/Redial} key } Pause: Inserts a pause when you are dialing or storing a fax number. A pause cannot be inserted as the first digit. Redial: Press to redial one of the last ten numbers. 22. {On Hook Dial} key } Use to dial a number from the numeric keypad without having to lift the handset. 23. {Image Density} keys (i and j) } i Use to change the setting of image density. 24. {Original Type} key } Press to select original type, Text or Photo. When the original type is selected, the corresponding indicator lights. 5 StellaCEN-basic_V4_FM. book Page 6 Thursday, July 19, 2001 1:39 PM Getting Started Starting the Machine 1 To start the machine, turn on the operation switch. Note This machine automatically enters Energy Saver mode or turns itself off if you do not use the machine for a while. See Chapter 2 "Settings You Can Change with the User Tools" in the System Settings manual. Turning On the Power A Confirm that the power cord is plugged into the wall outlet firmly and the main power switch is on. [. . . ] · mm · inch Note Default: mm 41 Using the Control Panel 4 42 5. Appendix Specifications This section contains the electrical and hardware specifications for the printer, including the information about the options. Component Resolution Printing Speed Parallel Interface Specification 300 × 300 dpi; PCL5e *1 , PS2 *2 600 × 600 dpi; PCL5e *1 , PCL6, PS2 Printing Speed depends on the machine. Standard 36-pin printer cable and a parallel port on the host computer. IEEE1284 Note Do not use a parallel cable that is longer than 3 meters (10 feet). [. . . ]