User manual RICOH AFICIO3506

[. . . ] TM 3506 Operating Instructions Copy Reference Tr sh9 00 e. eps Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH COMPANY, LTD. 15-5, Minami Aoyama 1-chome, Minato-ku, Tokyo 107-8544, Japan Phone: +81-(0)3-3479-3111 TM 3506 Operating Instructions Overseas Affiliates U. S. A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B. V. [. . . ] D Set your originals, then press the {Start} key. } Using the number keys A Press the {Zoom} key. } Trss202n. eps B Enter the reproduction ratio with the number keys. Copy026. tif C Press the [OK] key. D Set your originals, then press the {Start} key. } 62 Reduce/Enlarge Directional Magnification (%) Gcdhen1e. eps 2 1. Vertical % Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically. Note You can select the ratio from 25% to 400%. You can select a ratio regardless of the size of an original or copy paper. With some ratio, parts of the image will not be copied or blank margins will appear on copies. A Press the {Directional Mag. (%)} key. } Trss212n. eps 63 Copying B Enter the vertical ratio with the number keys, or the [+][-] keys. Copy027. tif Trss117e. eps 2 Note To change the ratio entered, press the {Clear/Stop} key and enter the new ratio. C Press the > or [#] key. D Enter the horizontal ratio with the number keys or the [+][-] keys. Copy028. tif Trss117e. eps E Press the [OK] key. F Set your originals, then press the {Start} key. } 64 Reduce/Enlarge Directional Size Magnification (mm) Gcdhen2e. eps 2 1. Vertical copy size The suitable reproduction ratios will be automatically selected when you enter the horizontal and vertical lengths of the original and copy image you want. Note You can enter sizes within the following ranges: Metric Version Inch Version 1 - 999mm (in 1mm steps) 0. 1" - 99. 9" (in 0. 1" steps) If the calculated ratio is over the maximum or under the minimum ratio, it is corrected within the range of the ratio automatically. However, with some ratios, parts of the image might not be copied or blank margins will appear on copies. A Press the {Menu} key. } Trss222n. eps 65 Copying Note If you have assigned the Directional Size Magnification (mm) function to one of the {Favorite} keys, press it and go to step D. To assign a function to the {Favorite} keys, P. 147 "Set favorite keys". B Press the [Next] key until [D. (mm)] is displayed. Copy004. tif 2 Trss112e. eps C Select [D. (mm)] with the <> keys, then press the [Select] key. Copy229. tif Trss114e. eps D Enter the vertical original size with the number keys, then press the > or [#] key. Copy030. tif Note To change the value entered: · If you have not pressed the > or [#] key yet, press the {Clear} key and enter a new value. · If you have already pressed the > or [#] key, select [Orig. :Vert. ] with the <> key and enter the new value. E Enter the vertical copy paper size with the number keys, then press the > or [#] key. Copy031. tif 66 Note If you press the [OK] key after entering the vertical original and paper sizes, the horizontal ratio will become same as the vertical ratio automatically. Reduce/Enlarge F Enter the horizontal original size with the number keys, then press the > or [#] key. [#] key. G Enter the horizontal copy paper size with the number keys, then press the H Press the [OK] key. I Set your originals, then press the {Start} key. } 2 67 Copying Shifting the Image Centering Gcidoh1e. eps 2 You can move the image to the center. [. . . ] If there is no improvement, change to copy paper with less curl. · When copying on rough surface paper, the copy image may be light. · When making two-sided copies, do not load paper in the paper tray to copy the reverse side. P. 42 "Copying from the Bypass Tray". 7 156 Use and Storage of Supplies · When setting paper thinner than 64g/m2, 17 lb or translucent paper in the paper trays or bypass trays, set it as shown in the figure below. [. . . ]