User manual RICOH CAPLIO RR10

[. . . ] Introduction Thank you for purchasing a Ricoh product. This manual explains the correct handling procedures and precautions for your camera. To ensure the best performance, please read the manual thoroughly before using the camera. Keep the manual handy for quick future reference. [. . . ] The symbol blinks during voice memo recording. Manual Focus You can adjust the focus manually when the subject is not brought into focus by the autofocus mode. 1 2 Set the mode dial to [ , , and press the MENU button. Press the button to select press the ENTER button. MODE SETTING or ] and MENU 58 3 Press the or button to select [FOCUS] and press the button. MODE SETTING 1/2 IMG. W/SOUND OFF FOCUS AF DATE IMPRINT Y/M/D ISO 200 ISO SETTING ON REDEYE REDUC BACK:CANCEL SELECT: 3 SHOOTING Note 4 Press the or button to select [MF] and press the ENTER button. MODE SETTING IMG. W/SOUND FOCUS AF DATE IMPRINT MF ISO SETTING REDEYE REDUC SEL. :ENTER CANCEL: · To cancel manual focus mode, select [AF]. (The mode will return to autofocus mode. ) 5 6 Press the CANCEL button. Press the or button to bring the subject into focus and press the shutter release button. Manual focus display Note 25 N 1600 · Enable the keep settings mode to save the focus setting. See "Keep Settings" (p. 96). FOCUS ADJUST 2001/07/15 11:25 The focus adjustment indicator ( FOCUS ADJUST ) will disappear about two seconds after · buttons. removing your finger from the 59 Date Imprint Mode Use this mode to record images imprinted with the date. Note 1 2 · Set the correct date and time in Setup mode. See "Setting the Date and Time" (p. 34). Set the mode dial to [ , press the MENU button. or ] and and Press the button to select press the ENTER button. MODE SETTING MENU 3 Press the or button to select [DATE IMPRINT] and press the button. MODE SETTING 1/2 IMG. W/SOUND OFF FOCUS AF DATE IMPRINT Y/M/D ISO SETTING ISO 200 REDEYE REDUC ON BACK:CANCEL SELECT: Note 4 · To cancel date imprinting mode, select [OFF]. Press the or button to select the display format and press the ENTER button. MODE SETTING IMG. W/SOUND OFF FOCUS Y/M/D DATE IMPRINT D/M/Y ISO SETTING M/D/Y REDEYE REDUC D/TIME SEL. :ENTER CANCEL: The display format will be as shown below in the case of 10:00am on 15 July 2001. 60 Y/M/D : 2001/07/15 D/M/Y : 15/07/2001 M/D/Y : 07/15/2001 D/TIME : 2001/07/15 10:00 5 6 Press the CANCEL button. Press the shutter release button. When date imprint mode is set, the colour of the date on the LCD monitor changes to orange. Note ISO Setting You can change the ISO sensitivity when recording images. · Enable the keep settings mode to save the date imprinting setting. See "Keep Settings" (p. 96). 3 SHOOTING 1 2 Set the mode dial to [ , press the MENU button. or ] and and Press the button to select press the ENTER button. MODE SETTING MENU 3 Press the or button to select [ISO SETTING] and press the button. MODE SETTING 1/2 IMG. W/SOUND OFF FOCUS AF DATE IMPRINT Y/M/D ISO 200 ISO SETTING ON REDEYE REDUC BACK:CANCEL SELECT: 61 4 Press the or button to select the ISO sensitivity (AUTO, ISO 200 or ISO 400) and press the ENTER button. MODE SETTING IMG. W/SOUND FOCUS DATE IMPRINT AUTO ISO SETTING ISO 200 REDEYE REDUC ISO 400 SEL. :ENTER CANCEL: Note 5 6 Press the CANCEL button. Press the shutter release button. 25 N 1600 ISO 400 · Enable the keep settings mode to save the ISO sensitivity setting. See "Keep Settings" (p. 96). ISO setting display 2001/07/15 11:25 Red-eye Reduction Mode If you use the flash to shoot a subject in a dark place, the eyes of the subject may appear red in the resulting picture. The redeye reduction mode helps to reduce this phenomenon. The flash fires several times before the shutter is released to lessen the red-eye phenomenon. 1 Set the mode dial to [ MENU button. ] and press the 62 2 Press the button to select press the ENTER button. MODE SETTING and 3 SHOOTING MENU 3 Press the or button to select [REDEYE REDUC] and press the button. MODE SETTING 1/2 IMG. W/SOUND OFF FOCUS AF DATE IMPRINT Y/M/D ISO SETTING ISO 200 REDEYE REDUC OFF BACK:CANCEL SELECT: 4 Press the or button to select [ON] and press the ENTER button. MODE SETTING IMG. W/SOUND FOCUS DATE IMPRINT ISO SETTING ON REDEYE REDUC OFF SEL. :ENTER CANCEL: 5 Press the CANCEL button. 63 Note 6 Press the shutter release button. Red-eye reduction display · Enable the keep settings mode to save the red-eye reduction setting. · The red-eye reduction function cannot be used in flash off mode. 25 N 1600 2001/07/15 11:25 When you press the shutter release button, the preflash will fire several time in succession before the main flash fires and the shutter is released. Important · The shutter takes about 1 second to release after the shutter button is pressed. [. . . ] SELECT: 2/3 ON OFF ON ENGLISH SELECT: 3/3 NTSC DIGITAL ZOOM (p. 67) LCD CONFIRM. (p. 97) AUTO OFF (p. 98) SET UP BEEP SOUND POWER SAVE SEQ. FILE NO. DATE SETTING LANGUAGE BEEP SOUND (p. 99) POWER SAVE (p. 100) SEQ. (p. 100) DATE SETTING (p. 34) LANGUAGE (p. 101) SET UP VIDEO OUT MP3:DELETE OPTIONS VIDEO OUT (p. 102) MP3:DELETE (p. 92) OPTIONS (p. 103) SELECT: 129 Declaration of Conformity "The Product complies with the requirements of the EMC Directive 89/336/EEC. " 130 INFORMATION TO THE USER USA FCC Part15 Class B The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ]