User manual RICOH CL5000

[. . . ] Instructions for Using This Finisher By installing this product on your printer, you will be able to collate and staple output. [. . . ] If you set collate printing in the application, printouts may be different from the settings you have made. 1 Do not pull the paper out until it has been stapled. If a paper misfeed occurs, check the error message on the printer's display panel, and then remove the paper. Reference For information about dealing with paper misfeeds, see Maintenance Guide 2 that comes with the printer. Note The reprinting operation after dealing with an error depends on the paper misfeed location. · When "Remove Misfeed R: Finisher " appears, printing restarts from the first page of the document being printed or the page of the document being printed when the misfeed occurred. · When "Remove Misfeed A:Internal Path" appears, printing restarts from the page of the document being printed when the misfeed occurred. Even if the paper misfeed occurred in the Internal Path, the error message may not disappear unless the covers of the Finisher are opened and then closed. Staple printing is cancelled in the following cases: · You set more sheets than can be stapled The maximum number of sheets that can be stapled is 30. [. . . ] ("Labels", "Thick Paper", and "Transparency" paper types cannot be stapled. ) · You set staple positions other than the specified staple positions · The binding positions and the staple positions are inconsistent when performing duplex printing · A different paper size is set in the middle of a job so that a mixture of paper sizes is output · Output is not directed to the Finisher Tray · The staples have run out Note If staple printing is cancelled, "Staple Cancelled" appears on the printer's panel display. Copyright©2001 G071-7880 UE USA EE GB 2 [. . . ]