User manual RICOH DDP184

[. . . ] User's Guide © 2007 Ricoh Corporation 5 Dedrick Place West Caldwell, NJ 07006 January 2007 N905342H © 2007 Ricoh Corporation. No part of this document may be reproduced without the expressed permission of Ricoh Corporation. The material in this document is for informational purposes and is subject to change without notice. Ricoh Corporation assumes no responsibility for errors or omissions in this document. [. . . ] Tray combination causes print speed down for preventing from happening paper jam. Troubleshooting OG L 00 5-9 Network Problems The following lists some common causes and solutions for network problems. If you suspect printing problems are network related, contact your System Administrator. Is the Ethernet cable broken or otherwise abnormal?Execute a print test to confirm the printer is operating properly. Is the network cable connected to the printer?Were both ends of the network cable connected prior to powering on the printer? 5-10 Troubleshooting OG L 00 OCP Display Messages The OCP displays the printer status with 1- to 2-line messages. There are three types of messages: status, warning, and error messages. The following table lists the messages in alphabetical order. Each message is explained and a corrective action is given when applicable. For information on messages not explained here, please refer to your option-specific user's guide. Message Any Tray Except MBT Description Corrective Action The wrong size paper is loaded except Load any tray except the MBT with the in the MBT requested paper size. See "E2XX, EC#XX, BR#XX, IM#XX Any "Call for Service" message requires Call for Service Error" on page 1-13. Contact your authorized Service Line 2 is the error code. Technician and provide the error code displayed on the OCP. Call for Service Exxx or other text Center Guide Open Close Guide Center Cover Open Close Guide Clearing Error E040 E041 Self-explanatory. Wait for the printer to return to a Ready state. Container x Top Cover Open The top cover of the container is open. Container x V Path Cover Open The v path cover of the container is Close Cover open. The printer is creating the requested software log. Wait for the printer to return to a Ready state. Change the basket. CS1 Lower Basket Size The stacker basket is the wrong size Change Basket E092 for the requested paper size CS1 Upper Basket Size The stacker basket is the wrong size Change Basket E093 for the requested paper size CS2 Lower Basket Size The stacker basket is the wrong size Change Basket E094 for the requested paper size CS2 Upper Basket Size The stacker basket is the wrong size Change Basket E095 for the requested paper size Deleting Jobs Status message. The selected jobs are Wait for the printer to return to a Ready being deleted from the print queue. Wait for the printer to return to a Ready state. Wait for the printer to return to a Ready state. Developer Bottle Not Set The developer bottle is not seated Set Developer Bottle E01E properly. Developer Charge E0A1 Developer Discharge E0A2 Developer Error Check Color Developer Error Retry Exhausting Replacement of the developer is running. [. . . ] Area of the physical page in which the printer is able to place a dot. A destination for a sequence of stored data or programs awaiting processing, as in files waiting in line to be sent to the printer. Glossary-4 OG L 00 R RAM. A type of internal memory that stores data temporarily. A type of internal memory that is used to store programs and data vital to the printer's basic operation permanently. S ScanCenter. [. . . ]