User manual RICOH MP5308D-E INSTALLATION

[. . . ] / DVD: 140msec horizontal/vertical (eject button upper) Track At Once, Disc At Once, Multi-session, Packet Write, Session At Once Format: Write: Read: CD-DA * * CD-ROM * CD-Extra * * CD-ROM XA * * * * Photo CD*3 *4 * * CD-i*3 *4 Video-CD * * CD-Text * * DVD-ROM * DVD±R * * DVD±RW * * Tray type (automatic loading/eject) DC5V, DC12V 23. 5VA 1. 02 Kg. 146 X 190 X 42mm Error Rate: 10-12 bits or less MTBF: 70, 000 power on hours (POH) MTTR: Within 30 minutes When operating When not operating Temperature: 0°C to +45°C -40°C to +65°C (No condensation) Humidity: max. (No condensation, max wet bulb +29C) Vibration: CD DVD Shock: (half sine wave shape) Read/Write : 0. 25G/0. 15G (zero to peak Read/Write : 0. 25G/0. 1G Read/Write:6G/1G (11msec. pulse duration) 0. 712GRMS (random vibration) 0. 712GRMS 2ms/160G & 10ms/80G Average access time CD: Mounting direction: Writing Mode: Compatible formats: Loading system: Power: Power consumption: Weight: Dimensions: Reliability: Environmental Conditions: Environmental dust: Class 3 million or less (3 million particles of 0. 5 micron dustper cubic foot or less) *3 CD-i and Photo-CD discs require special reader/player. [. . . ] Connect the 4-pin power cable from the computer's power supply to the power connector at the drive's rear panel. If there is no spare cable available in the computer, it will be necessary to purchase a splitter cable. Connect one end of the IDE cable to the drive. Then connect the other end to the motherboard's E-IDE connector. If a sound card is present in the computer, connect the drive to the sound card with the audio cable. Connect the power cable and turn on the computer. If the drive is not recognized on the computer, check to see if the port is enabled in the BIOS. For more detailed explanation, refer to the manual of the computer. L/R connectors Drive Primary or Secondary Sound card 8. Mother board It is not necessary to install any special device drivers. In order to ensure normal drive operation (or if the drive is not recognized by your computer), please check the following. GB Thank you for purchasing the RICOH CD-R/RW or DVD+RW/+R drive (hereafter referred to as the ('drive'). In order to ensure the drive's long lasting operating efficiency, it must be properly installed. Please follow these procedures carefully. In order to ensure normal drive operation · For Windows ME/98/95 Users - The driver is located in [control panels] - [system] - [device manager] - [CD-ROM]. - 32-bit is located in [control panels] - [system] - [performance]. · For Windows NT Workstation Ver. 4. 0 Users - The drive is located on the IDE controller in [control panels] - [SCSI adapter] - [devices]. · For Windows 2000 and XP Users - The drive is located in [control panels] - [System] - [hardware] - [device manager]. If the drive is not recognized by your computer · For Windows ME/98/95 Users - If a [!] indicator is displayed on the IDE controller in [control panels] - [system] -[devices manager]-[harddisk controllers], you will need to contact your PC's manufacturer or the motherboard's manufacturer and get the appropriate IDE controller driver. · For Windows NT Workstation Ver. [. . . ] - Never use this method to remove CD's from the drive except for emergency purposes. - The manual method mentioned here is used only for emergency purposes. Using the manual method for any other purpose may result in malfunctioning of the drive. [. . . ]