User manual RICOH PRIPORTDX 3443

[. . . ] DX 3443 Operating Instructions 1 2 3 4 5 6 7 Before Using the Machine Basics Printing Functions Troubleshooting User Tools Remarks Specifications Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read "Safety Information" before using the machine. Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. [. . . ] · When you want to change the print density: · Increase the print speed to lighten the print density. · Reduce the print speed to darken the print density. 2 A Press the {V} key to increase the speed and press the {W} key to reduce the speed. ANT136S 40 Note The following speeds are available: · Setting 1: 80 sheets/minute · Setting 2: 100 sheets/minute · Setting 3: 130 sheets/minute As a default setting, setting 2 is selected. In A3 Paper Feed mode, the print speed is fixed at setting 1. 3. Printing Functions Printing Functions Master Making Density You can adjust the image density to suit your needs. Note You can specify the image density that is selected by default when the power is turned on. See "Master Making Density" on p. 108 "4 Initial Settings". C Press the {Start} key. ANT128S A Press the {Master Making Density} key to select the density you want to set. D Press the {Proof} key to check the print image density. ANT123S BFU009S Note If your original has a coloured background such as red or blue, select a lighter image density to prevent the prints from appearing dirty. B Make sure the {Master Making} mode select key is lit. Note If it is not lit, press the {Master Making} mode select key. 41 Printing Functions Fine Mode Use the {Fine} key to make clear prints. Preset Reduce/Enlarge Use this function to reduce or enlarge originals by a preset ratio. A Set your originals. B Press the {Fine} key to select Fine mode. 3 GRRATI0E BFU010S C Enter the number of prints with the number keys. Note You can select a ratio regardless of the size of the original or the printing paper. However, with some ratios, parts of the image might not be printed or margins will appear on prints. You can choose from 7 preset ratios (3 enlargement ratios and 4 reduction ratios). Metric version Ratio (%) 141 122 ANT122S Original Print paper size A5 A4, B5 JIS B4 JIS A4 B4 JIS, A5 B5 JIS B5 JIS A4 -- A3 B4 JIS, A4 B5 JIS B4 JIS A4, B5 JIS A5 A3 A4, A4 A5, B4 JIS B5 JIS 115 93 87 82 71 D Press the {Start} key. ANT128S 42 Printing Functions Inch version Ratio (%) 155 129 121 93 77 74 65 Original Print paper size 5 1/2" × 8 1/2" 8 1/2" × 14" 5 1/2" × 8 1/2" 8 1/2" × 11" 8 1/2" × 14" 11" × 17" -- 8 1/2" × 14" 8 1/2" × 11" 11" × 15" 8 1/2" × 11" 11" × 17" 8 1/2" × 11", 8 1/2" × 11" 5 1/2" × 8 1/2" D Enter the number of prints with the number keys. 3 ANT122S You can specify the reproduction ratio that is selected by default when the power is turned on. See "Ratio" on p. 108 "4 Initial Settings". E Press the {Start} key. A Set your original. B Press the {Reduce/Enlarge} key. ANT128S ANT131S C Use the {U}{T} keys to select your desired reproduction ratio, and then press the {OK} key. 43 Printing Functions Erase Border This function erases all four margins of the original or paper. D Enter the number of prints with the number keys. 3 ACY068S Note You can specify within a range of 0 to 20mm, 0" to 0. 8", the width of the margin to be erased. See "Erase Border Width" on p. 108 "4 Initial Settings". ANT122S E Press the {Start} key. The default is 5 mm, 0. 2". A Set your original. B Press the {Erase Border} key. ANT128S Auto Delete Margin Shadow If the exposure glass or ADF is open during scanning, and Erase Border is not selected, dark areas surrounding the original might appear as a shadow on the prints. The Auto Delete Margin Shadow function automatically detects there areas and prevents them appearing on the prints. BFU011S C Use the {U}{T}keys to select the original size and orientation, and then press the {OK} key. 44 Printing Functions Economy Mode Use this function to save ink. Note Prints will appear lighter when Economy mode is used. To select either "On" or "Off" for Economy mode, see "Economy Mode" on p. 108 "4 Initial Settings". D Press the {Start} key. ANT128S A Set your original. B Press the {Economy Mode} key. 3 Memory/Class The Memory/Class function is useful especially for people such as teachers, who often have to make different numbers of prints from the same original for different classes or have to make the same number of prints from a number of different originals for the same class. Under the Memory/Class function, the following modes are available: BFU012S C Enter the number of prints with the number keys. Class Mode (print per class) Use to make prints from one original for multiple classes, with the same number of prints for each class. R R ANT122S R R R R GRCLAS0E R 45 Printing Functions Memory Mode (print per original) You can choose from the following two types of Memory mode: · Normal Memory Mode Use to make prints from a number of different originals. A different number of prints is made from each original. Class/Year Mode Reference If the use of this machine is not limited to school or college, you can choose to have this mode displayed as "Department" displayed instead of "Class/Year". See "Class Display" on p. 107 "3 Set Operation Mode". 3 A B C D A C B D GRCLAS1E · Stack Memory Mode Use to make prints from one original, with a different number of prints for each class. GRCLAS2E A AA AA STKMEM1E Note You can specify either Normal Memory Mode or Stack Memory Mode as the default. See "Memory Mode Setting" on p. 109 "5 Mode Settings". · All Use to make prints from the same original for all the registered classes in all the school years. · Class Select to make prints from the same original for only the classes selected. · Households Use to make prints from the same original for all the registered student households in the school. Recall Program Use to recall settings that you have stored under the Memory Mode and Class Mode. 46 Printing Functions Class Mode (print per class) Note You can print for up to 24 combinations of number of prints and number of classes. The maximum possible number of classes in one combination is 99. E With the number keys, enter the desired number of classes, and then press the {q} key. A Set your original. [. . . ] Otherwise the machine might move or come down to cause an injury. 6 · Temperature: 10 ­ 30°C, 50 ­ 86°F · Humidity: · Main Frame: 20 ­ 90%RH · Auto Document Feeder (option): 20 ­ 70%RH · A strong and level base (a sturdy desk and cabinet, etc. ). · The machine must be level within 5 mm, 0. 2" both front to rear and left to right. · Make sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m3/hr/person. Environments to avoid · Locations exposed to direct sunlight or strong light (more than 1500 lux). · Locations directly exposed to cool air from an air conditioner or heated air from a heater. [. . . ]