User manual RICOH PRO C901S GRAPHIC ARTS EDITION

[. . . ] Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Notes: Some illustrations in this manual might be slightly different from the machine. Certain options might not be available in some countries. For details, please contact your local dealer. [. . . ] [Apply Auto Paper Select] is effective for the copier function only if [Do not Display] or [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid for the tray. 114 Tray Paper Setting on Main and Sub-machines Tray Paper Setting on Main and Sub-machines This section explains the Tray Paper Setting on the two machines during Connect Copy. While connect copy is under way, the {User Tools} keys of the sub-machines remain disabled. If it is desired to change the defaults, press [Connect Copy] that appears in reverse video on the control screen of the main machine, and then, clear the connect copy before making changes. How the defaults in the Tray Paper Settings of copying of the main and sub-machines are used in connect copy will be explained. 3 Paper Tray Priority: Copier (Copier/Document Server) · The main and sub-machines follow their respective set values. Paper Tray Priority: Printer (Printer) · The main and sub-machines follow their respective set values. Paper Type: Tray 1 (LCT) · The main and sub-machines follow their respective set values. · In connect copy, only the paper tray corresponding to the paper size, orientation, and type that are set in common on the main and sub-machines can be used. To make the most of the connect copy function, it is advisable that you make the same paper settings on both the main and sub-machines. Paper Type: Tray 2 - 3 · The main and sub-machines follow their respective set values. · In connect copy, only the paper tray corresponding to the paper size, orientation, and type that are set in common on the main and sub-machines can be used. Original counter reset key You can set whether to enable the document counter reset key. · On · Off Auto Tray Switching When the paper runs out during copying, it can be automatically fed from a substitute paper feed tray, irrespective of the orientation of paper in that tray ­ provided it is the same size as that set in the other paper feed tray during automatic paper selection. This function is called "Auto Tray Switching". You can set whether to perform the Auto Tray Switching. · With Image Rotation You can copy using the Auto Tray Switching function. Depending on the function being performed rotation may not be possible. · Without Image Rotation You can make continuous copies provided paper of the same size and orientation is loaded. The "Supply paper" message appears when paper of the same size and orientation runs out. Copying is interrupted when this happens. · Off The "Supply paper" message appears when paper runs out. Copying is interrupted when this happens. [. . . ] Allman The Regents of the University of California Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 9 279 Appendix 3. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. [. . . ]