Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROBLIN CREATIX M800. We hope that this ROBLIN CREATIX M800 user guide will be useful to you.
Lastmanuals help download the user guide ROBLIN CREATIX M800.
Detailed instructions for use are in the User's Guide.
[. . . ] 38
22
RECOMMENDATIONS AND SUGGESTIONS
The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION
• The manufacturer will not be held liable for any damages resulting from
incorrect or improper installation. The minimum safety distance between the cooker top and the extractor hood is 650 mm (some models can be installed at a lower height, please refer to the paragraphs on working dimensions and installation). [. . . ] 1 on the wall at X mm below the first bracket (X = height of the upper chimney section), aligning the centre (notch) with the vertical line. Mark the wall at the centres of the bracket holes. • Drill ø 8 mm holes at all the marked centre points. Insert the wall plugs 11 in the holes. Fix the brackets using the 12a screws (4, 2 x 44, 4) supplied with the hood. 1
EN
99
Fitting the hood body
• Open the doors/the door (See section Open Panels). Remove the Metal grease filters using the handles provided. Adjust the two screws Vr, in the brackets 11a, so that they are at the start of their travel. Hook the hood body to the two brackets 11a. From the inside of the hood body, turn screws Vr to level the hood body itself. 11a
Vr
12a
Connections
DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120 mm, the choice of which is left to the installer. To install a ø 120 mm air exhaust connection, insert the reducer flange 9 on the hood body outlet. Fix the pipe in position using sufficient pipe clamps (not supplied). • Remove possible charcoal filters. ø 150
9
ø 120
EN
1 10 0
RECYCLING VERSION AIR OUTLET
To install the hood in recycling version, the optional charcoal filter kit must be purchased. • Remove the chimney angle bracket. Screw the filter cover onto the air outlet, using four screws 12c (2. Fix the air outlet grid 8 on the recirculation air outlet using the 2 screws 12d (2, 9 x 9, 5) provided. 16
12d 8 12c
Fitting the Lighting Unit
• • • • • Insert the Lighting unit cable into the opening. Inside the hood canopy there is a wiring box for connection of the lighting unit. Open the box and connect the wires to the terminal inside it, checking that the colours are combined properly. Close the wiring box, replace the grease filters and close the doors. [. . . ] Activates Delay mode, with automatic shutdown of the The Delay Led lights up. Motor, the Fans and the Lighting with a 30’ delay. It is disabled by pressing the button or turning the motor off. Pressing and holding the button for 5 seconds enables Button A Led flashes twice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROBLIN CREATIX M800
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROBLIN CREATIX M800 will begin.
