Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROBLIN CYLINDRE/2 - 5029007. We hope that this ROBLIN CYLINDRE/2 - 5029007 user guide will be useful to you.
Lastmanuals help download the user guide ROBLIN CYLINDRE/2 - 5029007.
Manual abstract: user guide ROBLIN CYLINDRE/2 - 5029007
Detailed instructions for use are in the User's Guide.
[. . . ] Gas burning appliances), a sufficient degree of aeration must be guaranteed in the room in order to prevent the backflow of exhaust gas. The kitchen must have an opening communicating directly with the open air in order to guarantee the entry of clean air. When the cooker hood is used in conjunction with appliances supplied with energy other than electric, the negative pressure in the room must not exceed 0, 04 mbar to prevent fumes being drawn back into the room by the cooker hood. In the event of damage to the power cable, it must be replaced by the manufacturer or by the technical service department, in order to prevent any risks. [. . . ] Unscrew the four safety screws placed at the top in the frame separation area. Unscrew the eight metric screws connecting the two columns, placed on both sides of the frame (B). Installation of components in recycling version: • Fix the recycling air outlet piece 15 to the upper part of the frame using four 12c screws supplied with the hood. Fix the flange (ø120) 10 to the lower part of the recycling air outlet 15. Put the reducer flange 9 on the hood body outlet. At this point, join the flanges with a pipe. In order to calculate the height of the pipe it is necessary to estimate the height of the hood (mm) and subtract 615 mm. Lengthen the frame so that the pipe can be inserted. Place the pipe between the two flanges and block it. Make sure that the height of the frame is correct considering the height of the cooker hood (H frame = H hood – 184). Adjust the height of the frame and tighten again the earlier removed screws. Tighten again the safety screws in order to give more stability to the structure. Fix the pipe with the pipe clamps 25 supplied with the hood. A
B
12c
15
10
EN
1 17
FIXING THE FRAME • Lift the frame up, making sure that the index over the frame plate is turned forwards. Fit the frame slots onto the two screws inserted in the ceiling as above, and turn until reaching the centre of the adjustment slot. Tighten the two screws and fasten the other two screws provided; before locking the screws completely, it is possible to adjust the frame by turning it, making sure that the screws do not come out of their housing in the adjustment slot. The Frame must be securely fastened so as to support both the weight of the Hood and the stress caused by occasional axial pressure against the fitted Appliance. After fixing, make sure that the base is stable even when the Frame is subjected to lateral stress. If the Ceiling is not strong enough in the area where the hood is to be fixed, the Installer must strengthen the area using suitable plates and counterplates anchored to resistant structures. 1 2
2
1
Connections
DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120mm, the choice of which is left to the installer. to install a ø 150 • To install the dumper 10a. Fix the pipe in position using sufficient pipe clamps (not supplied). [. . . ] Maintenance)
T3
Fixed
T4
Fixed
S1
Fixed
Flashing
EN
2 20
MAINTENANCE
REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1. 5 V carbon-zinc alkaline batteries of the standard LR03AAA type (not included). Do not place the remote control near to heat sources. Used batteries must be disposed of in the proper manner. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROBLIN CYLINDRE/2 - 5029007
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROBLIN CYLINDRE/2 - 5029007 will begin.
