User manual ROBLIN ICONE 900

[. . . ] Ensure the kitchen is fitted with an airbrick, which should have a cross-sectional measurement equivalent to the diameter of the ducting being fitted, if not larger. € The ducting system for this cooker hood must not be connected to any existing ventilation system, which is being used for any other purposes or to a mechanically controlled ventilation ducting. € The ducting used must be made from fire retardant materials and the correct diameter must be used, as incorrect sized ducting will affect the performance of this cooker hood. € When the cooker hood is used in conjunction with other appliances supplied with energy other than electricity, the negative pressure in the room must not exceed 0. [. . . ] LED 2 : Minimum speed - cooking with one pan or simmering LED 2 & 3 : Medium speed - normal cooking with up to 4 pans LED 2, 3 & 4 : Maximum speed - frying and cooking foods with strong odours Press LED button 5 to obtain the boost position for maximum effect and the LED will illuminate to confirm fan is switched ‘ON’. C - COMPLEMENTARY INSTRUCTIONS • Boost speed : To obtain the best performance it is advisable to switch ‘ON’ the cooker hood a few minutes (in the boost setting) before you start cooking. To program the complementary function, proceed as follows: - Press LED button 2 to switch ‘ON’ the fan motor and adjust the speed of the fan by pressing the LED button ‘+’ and ‘-‘. You should keep applying pressure to the ‘+’ and ‘-‘ button until the required speed is selected. - Press LED button 5 (boost speed) to switch ‘ON’ the fan motor in the boost setting. press LED button 5 to switch ‘OFF’ the boost setting immediately. It is advisable too that you should leave it running in the boost setting for approximately 5 minutes after finishing. € Pre-set stop of the boost speed : A pre-set stop after 5 minutes of the boost speed is available. Your cooker hood is supplied with a deactivated pre-set stop of the boost speed. To use the cooker hood with a pre-set stop of the boost speed re-programme the hood as follows: The lights and the fan motor should be switched ‘OFF’ to set the timer. Push the LED button ‘-’ until the LED lights will flash : One flash of the LED lights 2, 3, and 4 = function is switched ‘OFF’. Two flashes of the LED lights 2, 3, and 4 = function is switched ‘ON’. While the 5 minutes timer is running, It is available to stop immediately the boost speed by pressing the led button 5. While the 5 minutes timer is running, the indication of saturation of the filters is switched ‘OFF’. If a pre-set stop for the hood is switched ‘ON’ and the 5 minutes timer is still running, the boost speed will be switched ‘OFF’ together with the pre-set stop for the hood after the count down of 5, 10 or 15 minutes. It is available to stop the boost speed before the count down of the preset stop of the hood by pressing the led button 5. € Pre-set stop for the hood : This function allows you to program the cooker hood to automatically stop cooking after a pre-set period. The lights and the fan motor should be switched ‘OFF’ to set the timer. Proceed by repeatedly pressing the LED button 5 (Boost speed): Two flashes of the LED button 1 & 5 = 5 minutes delay. Three flashes of the LED button 1 & 5 = 10 minutes delay. four flashes of the LED button 1 & 5 = 15 minutes delay. 7 GB One flash of the LED button indicates the function is switched ‘OFF’. [. . . ] Therefore, please have your receipt available when requesting service as this constitutes the date from which your guarantee commenced. This Guarantee does not cover : - Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or filters or removable parts of glass or plastic. These items are considered to be consumable under the terms of this guarantee. 8 REMARKS Your appliance comply with harmonised standards CEI 335 and the Europeans’ directives (Low voltage) 73/23 and ( Electromagnetic compatibility ) 89/336. [. . . ]