User manual ROBLIN INSPIRATION 1000 DIMENSIONS

[. . . ] If other types of flue or appliances are fitted ensure that there is an adequate supply of fresh air to the room. Ensure the kitchen is fitted with an airbrick, which should have a cross-sectional measurement equivalent to the diameter of the ducting being fitted, if not larger. The ducting system for this cooker hood must not be connected to any existing ventilation system, which is being used for any other purposes or to a mechanically controlled ventilation ducting. The ducting used must be made from fire retardant materials and the correct diameter must be used, as incorrect sized ducting will affect the performance of this cooker hood. [. . . ] - The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. ATTENTION: Do not forget to use adequate plugs to the support brackets. The manufacturer accepts no responsibility in case of a faulty hanging due to the drilling and the setting up of plugs in the ceiling. It is necessary to provide an adequate thermal isolation in case the blower is placed in particularly cold rooms. The Hood can be fitted onto the lower surface of the wall furniture. To carry out a cutting (embedding) on the lower surface of the wall furniture, as indicated. To drill the outlet onto the top or the back of the wall furniture. To fix the 2 squares using the provided screws. To secure the connections with appropriate clamping rings or adhesive tape. To place the hood into the embedding and fit it on the 2 squares using the 4 screws supplied. DUCTING The hood is more effective when used in the extraction mode (ducted to the outside). Clean the surrounding area and metal grease filters as directed above. Insert the replacement filter and ensure the two retaining clips are correctly located. Extraction tube : Check every 6 months that the dirty air is being extracted correctly. Comply with local rules and regulations with regard to the extraction of ventilated air. lighting : If the lamp fails to function check to ensure it is fitted correctly into the holder. If lamp failure has occurred then it should be replaced with identical replacement. Do not replace with any other type of lamp and do not fit a lamp with a higher rating. Remote control handset : Caution, the remote control handset must be fitted with standard LR03-AAA size 1. These batteries should give a long life and constant discharge throughout their life. These batteries must be disposed of properly and could explode if damaged or exposed to heat. In the event of any malfunction or anomaly, notify your fitter who will have to check the appliance and its connection. [. . . ] When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European directive 2002/96/EC. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. please inform yourself about the local separate collection system for electrical and electronic product. Please act according to your local rules and do not dispose of your old products with your normal household waste. [. . . ]