User manual ROBLIN OMBRE 800 DIMENSIONS

[. . . ] Clean and/or replace the Filters after the speci ed time period. Clean the hood using a damp cloth and a neutral liquid detergent. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Ty Product Components 1 Hood Body, complete with: Controls, Light, Blower, Filters 2 square xing brackets 1 Flange ø 150 mm 3 Closing element Q. Any permanent electrical installation must comply with the latest regulations concerning this type of installation and a qualified electrician must carry out the work. Non-compliance could cause serious accidents or injury and would deem the manufacturers guarantee null and void. ATTENTION: Do not forget to use adequate plugs to the support brackets. The manufacturer accepts no responsibility in case of a faulty hanging due to the drilling and the setting up of plugs. The Hood can be fitted onto the lower surface of the wall furniture. To carry out a cutting (embedding) on the lower surface of the wall furniture, as indicated. Caution: The position of the cutting and the squares could be modified according to the position of the frame thickness 30 mm. A plate of compensation of 50, 40 or 20 mm (provided) can be fixed at the back hood EVOLIA. Wash the inner part of the panel as well by using a neutral detergent liqui d a nd a damp c loth; in a ny c ase do no t us e w et sponges or other clothes nor water jet or corrosive detergents. Close the sliding panel again and put the comfort panel into its seat. CLEANING METAL GREASE FILTERS The filters must be c leaned e very 2 months of ope ration, or more frequently for particularly heavy usage. Wash the filters, taking care not to be nd them. When refitting the filters, make su re that the handle is v isible on the outside. Close the panel again and hook up the comfort panel. REPLACING ACTIVATED CHARCOAL FILTERS These filters are not w ashable and cannot be regenerated, and must b e rep laced ap proximately every four months of o peration, or more frequently with heavy usage. Close the panel again and hook up the comfort panel. Remove the 3 screws fixing the L ighting s upport, a nd pull it out of from the Hood. Replace with an other o f t he same t ype, making su re t hat t he two pins are properly inserted in the lamp holder socket holes. [. . . ] Replace with an other o f t he same t ype, making su re t hat t he two pins are properly inserted in the lamp holder socket holes. Replace the Support, fixing it in place with the two screws removed as above. A defective light is cutting off the second one's. In this case, you have to change the two lights. [. . . ]