User manual ROBLIN PAGODE DIMENSIONS

[. . . ] · The contents of this document may be changed in the future without advanced notice. Contact our Customer Support Center for the latest information relating to product names and model numbers. · The illustration of the screen and the recorder shown in this manual may differ from the actual product. The utmost care has been taken to ensure the integrity of this document but if you find a questionable item, error or omission, please contact our Customer Support Center. [. . . ] Press the `OK button again to open the playback speed adjustment display. Press the + or - button to adjust the playback speed. [1. 0 PLAy]: Playback at normal speed. [0. 5 PLAy] ­ [0. 9 PLAy]: Playback speed slows down. [1. 1 PLAy] ­ [2. 0 PLAy]: Playback speed becomes faster. Recording from external microphones or other devices: External microphones and other devices can be connected and the sound can be recorded. Microphones supported by plug-in power can also be used. " · Do not plug and unplug devices into the recorder's jack while it is recording. · The built-in microphone will become inoperable when an external microphone is plugged into the recorder's MIC jack. Forwarding and rewinding: While the recorder is during playback mode, press and hold the 9 or 0 button. · When you release the button the recorder will resume normal playback. · If there is an index mark in the middle of the file, the recorder will stop once at that position. Press the `OK button to complete the setting. · If you leave the recorder for 3 seconds, the setting will be applied and the recorder will return back to the original screen. " · Even if playback is stopped, the changed playback speed will be retained. The next playback will be at that speed. 5 Press the `OK button. 1 2 3 4 5 6 7 8 9 File lock Recording mode Microphone sensitivity VCVA Timer recording Noise cancel Continuous playback Alarm playback Repeat playback " · The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied. Recording mode [MODE] [HQ]: High quality sound recording. " · To record a meeting or a lecture clearly, set other than [LP]. 6 EN Microphone sensitivity [MIC] [HI]: High recording sensitivity suitable to record conferences and lessons. [LO]: Standard recording sensitivity suitable for dictation. " · When you would like to clearly record a speaker's voice, set [MIC] to [LO] and hold recorder's built-in microphone close to the speaker's mouth (5-10 cm). " · The start/stop actuation level also varies according to the selected microphone sensitivity mode. · If the starting level is not adjusted within 2 seconds, the display will return to the previous one. · To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended. Noise cancel [NOISE-C] If the recorded audio is difficult to understand because of noisy surroundings, adjust the noise cancel setting level. [ON]: Noise will be reduced during file playback to achieve a better sound quality. [OFF]: Disables this function. Timer recording [TIMER] [ON]: Enables the timer recording. [OFF]: Disables this function. Variable Control Voice Actuator [VCVA] When the microphone senses that sounds have reached a preset threshold volume level, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when the volume drops below the threshold level. The VCVA feature extends recording time and conserves memory by stopping recording during silent periods, which helps the playback to be more efficient. [OFF]: Disables this function. Continuous playback [ALL PLAy] (For PAGODE only) [ON]: Plays file continuously in the current folder until the last file and then stops. [. . . ] Slide the POWER switch to the [ON] position. Q3: No sound or quiet sound is heard from the speaker while playing back. A3: The earphone plug may be plugged into the recorder. The volume may be set to the minimum level. [. . . ]