User manual ROCKTRON DEEPBLUE

[. . . ] Improper use of this equipment could result in increased RF emissions, which may or may not interfere with other electronic products. To insure against this possibility, always use good shielded cables for all audio input and output connections. This will help insure compliance with the Directive(s). For more information about other Rocktron products, please see your local dealer or one of our importers closest to you (listed on the Rocktron website - www. rocktron. com). Precautions Read all instructions contained in this manual. [. . . ] Refer all service to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or if the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT. QUALIFIED PERSONNEL SHOULD SERVICE THIS EQUIPMENT ONLY. DO NOT MAKE ANY INTERNAL ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY TIME OR TAMPER WITH INTERNAL ELECTRONIC COMPONENTS AT ANY TIME. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY VOID THE WARRANTY OF THIS EQUIPMENT AS WELL AS CAUSING A SHOCK HAZARD. OPERATING TEMPERATURE Do not expose this unit to excessive heat. This unit is designed to operate between 32 F and 104 F (0 C and 40 C). This unit may not function properly under extreme temperatures. Introduction Congratulations on your purchase of the Rocktron Deep Blue Chorus Pedal. The Deep Blue chorus pedal provides a smooth multivoiced chorus, rich in depth and lush in intensity. Seperate Rate, Depth and Intensity controls allows for a wide range of chorusing. The Deep Blue is built into a super tough road worthy extruded aluminium chassis. This pedal will stand up to the abuses of time and road wear and tear. The easy access battery compartment will make changing batteries during a gig a breeze. We have also equipped it with a super bright blue LED so you will know when the pedal is on. . . it is also just plain cool!Enjoy Connection 1 Connection 2 1 Rate Control - Adjusts the speed of the modulation. Turning this control clockwise increases the speed. Turning it counterclockwise decreases the speed. [. . . ] DC 9V Input - To use external power (not provided) use only a 9-Volt DC adapter 9-Volt Battery Compartment - to access pull on small tab labeled "OPEN". Always remember to unplug your guitar cords from the pedal to conserve battery life. Some battery drain may take place when unit is plugged in (even if the unit is bypassed). 7 8 9 10 Specifications Maximum Input Input Impedance Current Consumption Power Requirements -5dBu 1M ohm 30ma 9VDC <=300ma * CE Approved * Hints and Tips: Chorus pedals usually sound better when placed after distortion in the signal chain. Thus, if you are using stomp boxes, put the chorus pedal after the distortion. [. . . ]