User manual ROLAND BF-2

[. . . ] 13 Using [STATUS] to select the track whose parameters you want to adjust . 14 Preventing tempo data from being read from a CD-RW disc . No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Compressing/expanding a sample according to the tempo at which playback was stopped While playback is stopped, you can adjust the length of the sample according to the tempo of the location at which playback was stopped. [. . . ] Specify the region that you want to move, as described in "Specifying the editing region" (p. This operation pastes the phrases of the specified region to another location. If there were any phrases in the paste-destination, they will be overwritten by the phrases from the specified region. This operation inserts the phrases of the specified region to another location. If there ware any phrases in the inserting location of backward, they will be moved back for duration of specified region. During playback, you can switch audio tracks between muted (silent) and playing statuses. An audio track whose [STATUS] was dark when playback began cannot be switched to Play status by pressing [STATUS] during playback. During playback, press [STATUS] for the audio track that you want to mute (silence). [STATUS] will change from green to blinking, and the sound of that audio track will be muted (silenced). Once again, press the [STATUS] key that you caused to blink in step 1. [STATUS] will change from blinking to lighting solidly in green, and that audio track will resume playing. Even if a CD-RW disc is not inserted, you can mix down just pads/sequences if internal memory contains pads/sequences. * When you mix down using pads/sequences, the time available for the mixdown will be the remaining amount of sampling memory. For this reason, if you need to perform lengthy mixdowns, we recommend that you expand the memory. The time available for mixdown can be checked in the Song Information screen (Owner's Manual; p. When CD recorder screen or CD player screen is appearing, you cannot switch to mix down eves pressing [MIX DOWN]. If you mix down without a CD-RW disc, the "Data Type" will be "Standard. If the pads/sequences contained in the BF-2's internal memory, a message of "Also use PAD/SEQ for Mixdown?If you press [YES/ENTER], you will be able to use pads/sequences, and [MIX DOWN] will light. If you do not want to use pads/sequences, press [NO/EXIT]. If you want to use sequence tracks, press [SEQ PLAY] to make it light. For audio tracks that you want to include in the mixdown, press [STATUS] to make the button light in green. [. . . ] This parameter sets the ratio at which the output in the High frequency band is suppressed when the input level has exceeded the High threshold level. This parameter sets the time until when the low frequency band compressor starts working after the input level has exceeded the low threshold level. This parameter sets the time until when the middle frequency band compressor starts working after the input level has exceeded the middle threshold level. This parameter sets the time until when the High frequency band compressor starts working after the input level has exceeded the High threshold level. [. . . ]