User manual ROLAND HP-107E

[. . . ] No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING - When using electric products, basic precautions should always be followed, including the following: 1. [. . . ] In Split performance, the damper pedal will be applied only to the right-hand area of the keyboard. If you want the damper pedal to be applied to the left-hand area, refer to Applying the damper pedal to the left-hand keyboard area (p. You can change the location where the keyboard is divided (the split point) within the range of B1 through B6. This is set at the factory to "F#3. While continuing to hold the [Split] button, press the key that you want to specify as the split point. The key you pressed becomes the split point, and belongs to the left-hand section of the keyboard. You can also change the setting by pressing the [-] or [+] button while continuing to hold down the [Split] button. The split point key is included in the left-hand keyboard area. The tone played on the right side is the tone in use before the [Split] button is pressed, while the bass tone is played on the left side when the power is turned on, with a different tone selected when the left-hand tone is changed. If you hold down the [Split] button and simultaneously press the [-] and [+] buttons, the setting will return to its original value (F#3). The split point key is displayed as follows. The right hand will play the tone of the left button of Dual performance, and the left hand will play a suitable match for the right-hand tone. You can change the pitch of the tones on the left side of the keyboard in octave steps (p. When you continue holding the [Split] button, the currently specified split point value will be displayed. Changing tone played by the left hand 1. Each time you press the [-] or [+] button, the left-hand tone will change. With the factory setting, the center pedal functions as a sostenuto pedal (p. However, the center pedal setting can be changed to any of a variety of different functions. If you hold down the [Song/Tempo] button and press the [-] or [+] button, the beat will change. If you hold down the [Song/Tempo] button and press the [-] and [+] buttons simultaneously, the beat will go back to what it was before you changed it. 26) and Dual function are switched off, the Acoustic Layering function is then switched on. When you play a key while pressing on the center pedal, a suitable tone to match the piano tone is selected, and the two tones are layered and played together. [. . . ] La song non viene riprodotta/in una song non viene riprodotto solo il timbro di un particolare strumento Gli indicatori dei pulsanti delle tracce (pulsanti [Left] e [Right]) sono spenti (p. Il tempo della song registrata o del metronomo non è corretto Se selezionate una song interna in cui il tempo cambia durante la song e poi la registrate, il tempo cambia nello stesso modo nelle esecuzioni. anche il tempo del metronomo cambia nello stesso modo. Se registrate altro materiale senza cancellare la song precedentemente registrata, la song viene registrata con il tempo registrato la prima volta. [. . . ]