User manual ROLAND HP-203

[. . . ] WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING - When using electric products, basic precautions should always be followed, including the following: 1. Do not block any of the ventilation openings. [. . . ] ] button. You will return to the beginning of the recorded performance. Press the button of the track you want to record, making it flash. NOTE If you select a previously recorded track, that track will be overwritten by the newly recorded performance, and the previously recorded performance will be lost. The [ ] button will light, the [ ] button will flash, and the HP203 will enter recording standby mode. If you decide not to record, press the [ ] button once again. 53 Recording 9. Press the [ ] button. ] button). In this After two measures of count sound, recording begins. Recording starts when you start playing the keyboard (without pressing the [ case, a count is not sounded. When recording begins, the [ ] button and [ ] button will light. During the count-in, the count measure is indicated in the display as "-2" then "-1. " NOTE If you record additional parts without erasing the previously recorded song, the song tempo and time signature will remain as it was when the song was first recorded. 10. To stop recording, press the [ Listening to the Recorded Performance ] button. If the "Int Song" indicator is not lit, press the [Int Song/Ext Song] button. 11. Press the [ 12. Press the [ ] button. You will return to the beginning of the recorded performance. ] button. The recorded performance will play back. 13. When you press the [ ] button once again, playback will stop. After playing back a song, you can hold down one of the track buttons and press the [ ] button to erase the performance of only that track. At this time, the display will indicate "USr. " If you erase the performance from all tracks, the display will indicate "USr. " The recorded performance will disappear when you turn off the power. If you want to keep the performance you recorded, you must save it in internal memory or USB memory. Refer to "Saving the Songs" (p. If you have not saved the performance you recorded, you won't be able to play back another song. 60) the performance before playing back another song. NOTE NOTE 54 Recording Recording Your Playing Along with a Song Here's how you can play along with an internal memory song or an external memory song, and record your performance. For example, you can listen to the left-hand part while you record the right-hand part. The performance you play on the keyboard will be recorded in place of the sound of the part you select using the track buttons. The sound of the track button you selected will not be heard during recording. fig. Panel-RecSong-e. eps Performance Settings 1. Select a song. For details on how to select a song, refer to "Playing Back Songs" (p. If you want to record along with a song from external memory, connect USB memory or floppy disk drive before you continue (p. 46). NOTE The performance will be recorded at the tempo of the song you selected when recording. If you record your playing along with a song, it will be recorded with the time signature of that song. Settings for Recording 4. Press the [ ] button. 55 Recording 5. Press the track button for the part you want to record, making the button flash. This allows you to record while listening to the selected song. The [ ] button will light, the [ ] button will flash, and the HP203 will enter recording standby mode. If you decide not to record, press the [ ] button once again. How performance parts correspond with track buttons Track button Track [Right] button Track [Left] button Track [Accomp] button Right-hand part Left-hand part Performance data other than the right-hand part and left-hand part Performance part Starting Recording 6. Press the [ ] button. After a two-measure count, recording will begin. Even if you don't press the [ ] button, recording will begin when you play the keyboard. In this case, a count won't be sounded. When recording begins, the [ ] button and [ ] button will light. During the count, the display will indicate the measure number as "-2" and "-1. " Stopping Recording 7. Press the [ Recording will stop. ] button. Listening to the Recorded Performance If the "Int Song" indicator is not lit, press the [Int Song/Ext Song] button. 8. 9. Press the [ ] button. You will return to the beginning of the recorded performance. Press the [ ] button. The recorded performance will play. 10. Press the [ NOTE ] button once again to stop playback. The recorded performance will disappear when you turn off the power. [. . . ] Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 GERMANY Roland Elektronische Musikinstrumente HmbH. Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090 BRAZIL Roland Brasil Ltda. Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 UNITED KINGDOM Roland (U. K. ) Ltd. Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 702701 PANAMA SUPRO MUNDIAL, S. A. [. . . ]