User manual ROLAND KR107

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 3, 4, 5), and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] Explanation You can use a function assigned to the pedal. The left pedal is dedicated to switching User Programs. The function assigned to the left pedal cannot be used. The center pedal is dedicated to switching User Programs. The function assigned to the center pedal cannot be used. Left Pedal Center Pedal Press the [Exit] button to return to the User Program screen. Using the Pedal to Switch User Programs You can assign the function of the sequential switching of the "User Programs" to the pedal. That way, each time you depress the pedal, the KR107 switches to the next User Program. Great for use in concerts and similar situations, this allows you to prepare and save your User Programs in the sequence they are to be used, and then call up User Programs in the appropriate order while you perform, simply by depressing the pedal. Chapter 6 Sequential Loading of User Program Sets Stored (Load Next) When using the pedal to switch your User Programs, you can also call up sequential sets of User Programs as saved to external memory. This feature is called the "Load Next" function. 3. Touch <Load Next> Display to select the setting. Touch <Pedal> in the lower part of the screen. A "PEDAL screen" like the following appears. fig. d-upgopt. eps_50 OFF Switches Load Next off. The next press of the pedal after the 36th User Program is called up returns you to the first User Program of the same User Program set. The next press of the pedal after the 36th User Program has been called up takes you to the first User Program in the next User Program set. ON Press the [Exit] button to return to the User Program screen. The Pedal Shift and Load Next settings are stored in each User Program set. 112 Chapter 6 User Program Registration Simultaneously Switching User Program and Transmitting PC Numbers You can have PC (Program Change) numbers be transmitted to an external MIDI device when you switch the User Program on the KR. You can register PC number settings to each of the User Programs, just as you can with button settings and other settings preferences. 5. Press the [Exit] button. The User Program screen returns to the display. Touch <Write> to save the setting to the User Program. For more detailed information, refer to "Saving Performance Settings (User Program)" (p. 108). Calling Up the Performance Settings to Be Set 1. Press the [User Program] button, then touch the name of the performance setting you want to set. Setting the Transmission of the PC 2. Touch < fig-upgPCset. eps_50 >< > to switch the page to display the following screen. Chapter 6 4. Display Bank Select MSB Bank Select LSB Program Change Tx PC Channel for the parameter and make the Description Sets the Bank Select MSB. Sets the Program Change messages (Program Numbers). This prevents the PC number from being transmitted (Off), or sets the transmission channel (Channel 1­16). 113 Chapter 7 Creating and Editing Songs Multitrack Recording with 16 Parts (16-Track Sequencer) Multitrack recording always you to listen to previously recorded material while continuing to add performances of other parts. The KR is capable of multitrack recording of up to sixteen parts. Since each part's performance is recorded using one tone, you can layer performances, using up to sixteen tones for the data in one song. [. . . ] TEL: (868) 638 6385 ITALY Roland Italy S. Viale delle Industrie 8, 20020 Arese, Milano, ITALY TEL: (02) 937-78300 ISRAEL Halilit P. Tel-Aviv-Yafo ISRAEL TEL: (03) 6823666 As of November 1, 2006 (ROLAND) WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ]