User manual ROLAND MD-8

[. . . ] In the Total Control Modules area, open MIDI to specify what you want to assign. Selecting a clip 1 Select the target. 1 2 Click [MIDI]. Specify what you want to assign. 2 Select the clip. The following choices are available: PLAY POSITION SPEED CONTROL COLOR EQ (Fore) COLOR EQ (Back) LOOP START POSITION LOOP END POSITION BPM Adjusts the playback point Adjusts the speed Adjusts the foreground plug-in color EQ Adjusts the background plug-in color EQ Adjusts the loop start point Adjusts the loop end point Change the BPM 3 Execute. Operations in conjunction with the Ctrl key · Hold down the computer's Ctrl (control) key and turn the MD-8's VISUAL PLUGIN CONTROL knob to change the FX MODULES. · Hold down the computer's Ctrl (control) key and turn the MD-8's TOTAL FADER CONTROL knob to change the TOTAL CONTROL MODULES. · Hold down the computer's Ctrl (control) key and turn the MD-8's ASSIGNABLE CONTROL knob to adjust the ASSIGNABLE CONTROL parameter. Installation and setup 1 Installing the USB driver for motion dive . tokyo console "MD-8" "My MDTCTune" folder structure (video, music, plug-ins, etc. ) The "My MDTCTune" folder contains the videos, still images, music, and plug-ins you will use in motion dive. You'll use this folder when you want to add plug-ins or music files, so remember its location. [. . . ] Is there sufficient free space on your hard disk?Delete unneeded files to increase the amount of free space. After deleting the unneeded files, empty the recycling bin. Does your computer or USB hub have sufficient power supply capacity?The MD-8 cannot be connected if insufficient power is supplied to it. Check whether one of the following cases apply. · If you are using the MD-8 with a notebook computer that is running on its battery, operation may be unreliable with some models of computer. If this is the case, connect the AC adaptor to your notebook computer. · The power conservation mode of your computer may limit the power that is supplied to USB. · In some cases, the MD-8 cannot be used with a buspowered hub (a hub that does not contain a power supply). Please use a self-powered hub (a hub that contains a power supply). Make sure that the MD-8's USB cable and your computer are correctly connected. It may take about 15 seconds (or more) after the USB cable is connected. Does your computer or USB hub have sufficient power supply capacity?The MD-8 cannot be connected if insufficient power is supplied to it. Check whether one of the following cases apply. · If you are using the MD-8 with a notebook computer that is running on its battery, operation may be unreliable with some models of computer. If this is the case, connect the AC adaptor to your notebook computer. · The power conservation mode of your computer may limit the power that is supplied to USB. · In some cases, the MD-8 cannot be used with a buspowered hub (a hub that does not contain a power supply). Please use a self-powered hub (a hub that contains a power supply). Refer to the operation manual for your computer, and make sure that USB is enabled. [. . . ] Malatan House No. 1 Al Noor Street, Ruwi SULTANATE OF OMAN TEL: 2478 3443 TAIWAN ROLAND TAIWAN ENTERPRISE CO. , LTD. 112 Chung Shan N. Road Sec. 2, Taipei, TAIWAN, R. O. C. TEL: (02) 2561 3339 GUATEMALA Casa Instrumental Calzada Roosevelt 34-01, zona 11 Ciudad de Guatemala Guatemala TEL:(502) 599-2888 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 BELGIUM/FRANCE/ HOLLAND/ LUXEMBOURG Roland Central Europe N. V. Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811 SPAIN Roland Iberia, S. L. [. . . ]