User manual ROLAND ME-6B

[. . . ] The manual should be saved and kept on hand as a convenient reference. Main features Simple Operation--Works Like a Compact Effects Processor Each effect is controlled with a dedicated knob. Intuitive operation, similar to that of compact effects processors, lets you make changes to tones directly. Multi-Function Expression Pedal The ME-6B is equipped with an expression pedal that gives you control over six different specialized pedal effects. It can also be switched for use as a volume pedal. Powerful COSM Drive Sound Roland's original "COSM" modeling technology lets you perform with a wide variety of powerful distortion effects, from classic vintage sounds, to original distortion sounds. COSM (Composite Object Sound Modeling) Composite Object Sound Modeling (COSM) is Roland's innovative and powerful sound modeling technology. [. . . ] Hold down the DELAY pedal for at least two seconds. "Using the HOLD Function" · If the DELAY pedal is pressed when the effect is on, the pedal indicator goes out, and the effect is turned off. · If the DELAY pedal is pressed when the effect is off, the pedal indicator turns red, and the effect is turned on. When you continue to depress the pedal, after two seconds the pedal's indicator starts to flash, and the tempo can then be set with the effect on. Here, the delay time is indicated by the value set with the TIME knob. Press the DELAY pedal in timing with the tempo more than two times. The delay time is set according to the time interval between each press of the pedal. The pedal indicator flashes in time with the tempo. * Press the pedal to set the tempo while no guitar sound is playing. * When the type is set to "PAN" or "SPACE PAN, " the delay time is set to half the interval between the presses of the pedal. Hold down the pedal switch for at least two seconds to complete the tempo setting. The effect goes on, and instead of flashing, the pedal indicator will light. Hold down the pedal switch for the duration of the recording (the pedal indicator flashes). Release the DELAY pedal to stop recording. Playback of the recorded content begins simultaneously (the CHECK indicator remains lit). * The maximum recording time is 2 seconds. If the DELAY pedal is held down for more than 2 seconds, the recording stops automatically, and the recorded content is then played back. * An oscillating sound may be audible with extremely short recording times. When layering recordings, repeat Steps 2 and 3. Adjust the volume Adjust the volume of the playback sound with the E. LEVEL knob. Press the pedal switch to stop the playback (the pedal indicator goes out). The unit returns to recording standby, and the pedal's indicator flashes at a fixed interval. * When playback is stopped, the recorded content is erased. [. . . ] 13 F FACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 FAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 FEEDBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]