User manual ROLAND SR-JV80-05

[. . . ] Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. [. . . ] · Select the SR-JV80-05 for the software's MIDI device setting. · The SR-JV80-05 will not operate in the Mac OS X Classic environment. Use the SR-JV80-05 when the Classic environment is not running. Recording MIDI Data, Playing a Software Sound Module To transmit MIDI messages from a MIDI keyboard or digital piano in order to record MIDI data using DAW software or play a software sound module, make the following connections and settings. MIDI IN Cable (CONNECT TO MIDI OUT) To MIDI OUT Connector Software's MIDI Input Device: SR-JV80-05 MIDI Keyboard Digital Piano * When connecting other devices, always be sure to turn the volume down before connecting or disconnecting cables to prevent damage to speakers. 14 Basic Use Playing Back MIDI Data To send MIDI messages that were recorded using DAW software to a MIDI sound module or software sound module, make the following connections and settings. MIDI OUT Cable (CONNECT TO MIDI IN) To MIDI IN Connector Software's MIDI Output Device: SR-JV80-05 MIDI Sound Module Digital Piano * When connecting other devices, always be sure to turn the volume down before connecting or disconnecting cables to prevent damage to speakers. To play a MIDI keyboard and use a MIDI sound module as the instrument, turn on the software's MIDI THRU feature. MIDI Signal Flow (THRU: On) MIDI Signal Flow (THRU: Off ) MIDI IN Cable (CONNECT TO MIDI OUT) To MIDI OUT Connector MIDI Keyboard MIDI OUT Cable (CONNECT TO MIDI IN) To MIDI IN Connector MIDI Sound Module 15 Troubleshooting If you experience problems, read this chapter first. It contains tips for solving most problems. If this chapter cannot help you solve a problem, please refer to the support section of our website. If the problem is not resolved, refer to the contact information listed at the end of this document. Roland support website: http://www. roland. com/ Driver Installation Problem Installer does not start Confirmation Are you attempting to install from a networked CD-ROM drive?Are you logged on with a user account that does not have administrator privileges?Cannot install Is the "Driver Signing Options" setting set to [Block]?Did the computer enter standby (suspend) mode, hibernate mode, or sleep mode while the SR-JV80-05 was connected?Did you disconnect and reconnect the USB cable while using the SR-JV80-05?Exit all programs that are using the SR-JV80-05, disconnect the SR-JV80-05's USB cable, and then reconnect it. If the problem is not resolved, restart the computer. Exit all programs that are using the SR-JV80-05, disconnect the SR-JV80-05's USB cable, and then reconnect it. If the problem is not resolved, restart the computer. Was the SR-JV80-05 connected to the computer while the computer was starting up?Are you using the Media Player included with Windows?(Windows 7/Windows Vista) Connect the SR-JV80-05 after the computer has started up. (With some computers, the SR-JV80-05 cannot be used if it is connected to the computer while the computer is starting up. ) Use different software. MIDI devices cannot be selected in Media Player. [. . . ] Double-click the [Uninstal] icon in one of the following folders on the included CD-ROM. Operating System Windows 7 Windows Vista Windows XP Folder Open [Driver], and then [Win7] Open [Driver], and then [Vista] Open [Driver], and then [XP] 5. When a confirmation screen regarding user account control appears, click [Yes] or [Continue]. When "The installed SR-JV80-05 driver will be uninstalled. " appears, click [OK]. If other messages appear, follow the instructions on the screen. 7. When "Uninstallation was completed. " appears, click [OK] and restart the computer. 22 Troubleshooting Mac OS X 1. [. . . ]