User manual ROLAND SRJV80-12

[. . . ] In some instances, "Operation Failed" was displayed when writing to CD with the SRJV80-12CD's internal CD-RW drive, preventing normal audio CD WRITE and BACKUP functions. When mastering in CDR mode with the MASTERING ROOM function, a slight amount of noise could occasionally be heard at the beginnings of songs. Tracks would not playback immediately after the Mastering V. Tracks were changed under certain conditions in the MASTERING ROOM screen. The following improvements have been made in version 2. 011 software. [. . . ] Control Surface functionality (UTILITY: CONTROL SURFACE) has been added. Please refer to the "SRJV80-12CD Control Surface Mode Guide" accompanying this update for more information. (This updated feature will work for all models of the SRJV80-12. ) 2. The AUTOMIX SW can now be saved in either On or Off positions when storing a Project. "VS-2400CD" is now a "Save As" option in the PROJECT EXPORT screen thus allowing CD backup of SRJV80-12 project data in VS2400CD format. VS-2400CD data backup CD-Rs can now be recognized and recovered from the PROJECT LIST screen of the SRJV80-12. (Simultaneous conversion and importing of VS-2400CD data) 5. When performing a TRACK EXCHANGE, the track Names will be exchanged also. (NOTE: While the TRACK EXCHANGE function can be undone, the Name exchange is NOT undoable) 6. When performing a TRACK IMPORT, there is now an option to append the Source track to the end of an existing Destination track (i. e. The "Safe" setting can be used, if necessary, only in LCD operational mode. SRJV80-12 Update Information: Version 2. 008 The following list describes enhancements to the Roland SRJV80-12 Digital Studio Workstation within software version 2. 008. Refer to the documentation included with the update disk/files available from Roland Corporation US for the update procedure. When the Knob/Fader Assign Sw is assigned to Fader and the Knob/Fader Sw is pressed to ON, the FX Return amount to AUX busses may be controlled by fader movements. . . making it much easier to control effects levels sent to the AUX busses for creating alternate mixes with effects (i. e. The following problems have been corrected in version 2. 008 software. Intermittent drive directory issues addressed with software improvements. After performing a "Store Current" operation, the SRJV80-12 may have locked up during the operation and could have possibly corrupted the directory. When recorded Automix data was saved in a project, the project size displayed may have been corrupted, or the remaining space displayed on the drive partition may have been greatly reduced. A certain isolated number of takes listed in the TakeList could cause directory corruption or lockups. Directly after performing a CD PLAYER function, the Track Status buttons would not change from PLAY (green) status without reloading the project or initializing the mixer. [. . . ] A certain isolated number of takes listed in the TakeList could cause directory corruption or lockups. Directly after performing a CD PLAYER function, the Track Status buttons would not change from PLAY (green) status without reloading the project or initializing the mixer. When previewing 8 bit (or less) . wav files with very long file names, there was a problem that would restart or lockup the SRJV80-12. When attempting to make track assignments for performing a Track Bounce operation, there was a problem when using the mouse to assign source tracks to destination tracks when previous adjacent tracks were linked. [. . . ]