User manual ROLAND SYSTEM-100-104

[. . . ] 2nd bytes 05H 3rd byte vvH n = MIDI channel number: 0H-FH (ch. 1-ch. 16) kk = note number: 00H-7FH (0-127) vv = note off velocity: 00H-7FH (0-127) * * For Drum Parts, these messages are received when Rx. NOTE OFF = ON for each Instrument. The velocity values of Note Off messages are ignored. Portamento Time (Controller number 5) Status BnH n = MIDI channel number: 0H-FH (ch. 1-ch. 16) vv = Portamento Time: 00H-7FH (0-127), Initial value = 00H (0) * This adjusts the rate of pitch change when Portamento is ON or when using the Portamento Control. A value of 0 results in the fastest change. qNote on Status 9nH 2nd bytes kkH 3rd byte vvH Data Entry (Controller number 6, 38) Status BnH BnH 2nd bytes 06H 26H 3rd byte mmH llH n = MIDI channel number: 0H-FH (ch. 1-ch. 16) kk = note number: 00H-7FH (0-127) vv = note on velocity: 01H-7FH (1-127) * * Not received when Rx. NOTE MESSAGE = OFF. (Initial value is ON) For Drum Parts, not received when Rx. NOTE ON = OFF for each Instrument. n = MIDI channel number: 0H-FH (ch. 1-ch. 16) mm, ll = the value of the parameter specified by RPN/NRPN mm = MSB, ll = LSB Volume (Controller number 7) Status BnH 2nd bytes 07H 3rd byte vvH qPolyphonic Key Pressure Status AnH 2nd bytes kkH 3rd byte vvH n = MIDI channel number: 0H-FH (ch. 1-ch. 16) vv = Volume: 00H-7FH (0-127), Initial Value = 64H (100) * * Volume messages are used to adjust the volume balance of each Part. [. . . ] 00 00 10 00-40 VOICE RESERVE Part 10 (Drum Part) Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Part 7 Part 8 Part 9 Part 11 : Part 16 02 06 02 02 02 02 02 02 02 02 00 00 2 6 2 2 2 2 2 2 2 2 0 0 40 01 10 40 01 11# 40 01 12# 40 01 13# 40 01 14# 40 01 15# 40 01 16# 40 01 17# 40 01 18# 40 01 19# 40 01 1A# 40 01 :# 40 01 1F# * The sum total of voices in the voice reserve function must be equal to or less than the number of the maximum polyphony. The maximum polyphony of this instrument is 128. For compatibility with other GS models, it is recommended that the maximum polyphony be equal or less than 24. 00 00 01 00-07 REVERB MACRO 00: Room 1 01: Room 2 02: Room 3 03: Hall 1 04: Hall 2 05: Plate 06: Delay 07: Panning Delay 0-7 0-7 0-127 0-127 0-127 04 Hall 2 40 01 30 40 01 31 40 01 32 40 01 33 40 01 34 40 01 35 * * 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-07 00-07 00-7F 00-7F 00-7F REVERB CHARACTER REVERB PRE-LPF REVERB LEVEL REVERB TIME REVERB DELAY FEEDBACK 04 00 40 40 00 4 0 64 64 0 REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each reverb parameter will be set to the most suitable value. REVERB CHARACTER is a parameter that changes the reverb algorithm. The value of REVERB CHARACTER corresponds to the REVERB MACRO of the same number. 9 40 01 38 00 00 01 00-07 CHORUS MACRO 40 01 39 40 01 3A 40 01 3B 40 01 3C 40 01 3D 40 01 3E 40 01 3F * 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-07 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F CHORUS PRE-LPF CHORUS LEVEL CHORUS FEEDBACK CHORUS DELAY CHORUS RATE CHORUS DEPTH CHORUS SEND LEVEL TO REVERB 00: Chorus 1 01: Chorus 2 02: Chorus 3 03: Chorus 4 04: Feedback Chorus 05: Flanger 06: Short Delay 07: Short Delay (FB) 0-7 0-127 0-127 0-127 0-127 0-127 0-127 02 Chorus 3 00 40 08 50 03 13 00 0 64 8 80 3 19 0 CHORUS MACRO is a macro parameter that allows global setting of chorus parameters. When you use CHORUS MACRO to select the chorus type, each chorus parameter will be set to the most suitable value. 00 00 02 00 - 7F EFX TYPE (MSB, LSB) 00 00 - 7F 7F 00 00 Thru 40 03 00 * * Refer to "EFX Type Table" (p. This EFX Type is current EFX type of this system. When part EFX type is same to this EFX type, that part connect to EFX. This parameter differs from the conventional Fine Tuning (RPN #1) parameter in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect. 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-5F 00-5F 00-7F 00-7F 00-01 PART LEVEL 0-127 (= CC# 7) VELOCITY SENSE DEPTH 0-127 VELOCITY SENSE OFFSET 0-127 PART PANPOT -64 (RANDOM), -63 (LEFT) - +63 (RIGHT) (= CC# 10, except RANDOM) KEY RANGE LOW (C-1)-(G9) KEY RANGE HIGH (C-1)-(G9) CC1 CONTROLLER NUMBER 0-95 CC2 CONTROLLER NUMBER 0-95 CHORUS SEND LEVEL 0-127 (= CC# 93) REVERB SEND LEVEL 0-127 (= CC# 91) Rx. BANK SELECT OFF/ON 64 40 40 40 00 7F 10 11 00 28 01 (00*) 100 64 64 0 (CENTER) C-1 G9 16 17 0 40 ON (OFF*) 40 1x 19 40 1x 1A 40 1x 1B 40 1x 1C 40 1x 1D 40 1x 1E 40 1x 1F 40 1x 20 40 1x 21 40 1x 22 40 1x 23 * * * "Rx. BANK SELECT" is set to OFF by "GM1 System On, " and Bank Select message will be ignored. "Rx. BANK SELECT" is set to ON by "GM2 System On. " "Rx. BANK SELECT" is set to ON by power-on Reset or by receiving "GS RESET. " 00 00 01 00-01 Rx. BANK SELECT LSB OFF/ON 00 OFF 40 1x 24 * This instrument can be recognise Bank Select LSB (40H-43H) even if this message is OFF. 00 00 01 00 00 03 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00-01 00-7F 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 TONE REMAIN Bank Select LSB Range TONE MODIFY 1 Vibrato rate (= NRPN# 8) TONE MODIFY 2 Vibrato depth (= NRPN# 9) TONE MODIFY 3 TVF cutoff frequency (= NRPN# 32) TONE MODIFY 4 TVF resonance (= NRPN# 33) TONE MODIFY 5 TVF&TVA Env. attack (= NRPN# 99) TONE MODIFY 6 TVF&TVA Env. decay (= NRPN# 100) OFF/ON LSB (from) LSB (to) -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 01 40 43 40 40 40 40 40 40 ON 40H 43H 0 0 0 0 0 0 40 1x 25 40 1x 28 40 1x 29# 40 1x 30 40 1x 31 40 1x 32 40 1x 33 40 1x 34 40 1x 35 11 40 1x 36 40 1x 37 00 00 01 00 00 01 0E-72 0E-72 TONE MODIFY 7 TVF&TVA Env. release (= NRPN# 102) TONE MODIFY 8 Vibrato delay (= NRPN# 10) SCALE TUNING C SCALE TUNING C# SCALE TUNING D SCALE TUNING D# SCALE TUNING E SCALE TUNING F SCALE TUNING F# SCALE TUNING G SCALE TUNING G# SCALE TUNING A SCALE TUNING A# SCALE TUNING B -50 - +50 -50 - +50 40 40 0 0 40 1x 40 40 1x 41# 40 1x 42# 40 1x 43# 40 1x 44# 40 1x 45# 40 1x 46# 40 1x 47# 40 1x 48# 40 1x 49# 40 1x 4A# 40 1x 4B# * 00 00 0C 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] -64 - +63 [cent] 40 40 40 40 40 40 40 40 40 40 40 40 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] 0 [cent] SCALE TUNING is a function that allows fine adjustment to the pitch of each note in the octave. The pitch of each identically-named note in all octaves will change simultaneously. A setting of +/- 0 cent (40H) is equal temperament. Supplementary material, "The Scale Tune Feature"(p. 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 40-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F MOD PITCH CONTROL MOD TVF CUTOFF CONTROL MOD AMPLITUDE CONTROL MOD LFO1 RATE CONTROLMOD LFO1 PITCH DEPTH MOD LFO1 TVF DEPTH0 MOD LFO1 TVA DEPTH0 MOD LFO2 RATE CONTROL MOD LFO2 PITCH DEPTH0 MOD LFO2 TVF DEPTH0 MOD LFO2 TVA DEPTH0 BEND PITCH CONTROL BEND TVF CUTOFF CONTROLBEND AMPLITUDE CONTROL BEND LFO1 RATE CONTROL BEND LFO1 PITCH DEPTH0 BEND LFO1 TVF DEPTH0 BEND LFO1 TVA DEPTH0 BEND LFO2 RATE CONTROL BEND LFO2 PITCH DEPTH0 BEND LFO2 TVF DEPTH0 BEND LFO2 TVA DEPTH0 CAf PITCH CONTROL CAf TVF CUTOFF CONTROL CAf AMPLITUDE CONTROL CAf LFO1 RATE CONTROL CAf LFO1 PITCH DEPTH CAf LFO1 TVF DEPTH CAf LFO1 TVA DEPTH CAf LFO2 RATE CONTROL CAf LFO2 PITCH DEPTH CAf LFO2 TVF DEPTH CAf LFO2 TVA DEPTH PAf PITCH CONTROL PAf TVF CUTOFF CONTROL PAf AMPLITUDE CONTROL PAf LFO1 RATE CONTROL PAf LFO1 PITCH DEPTH PAf LFO1 TVF DEPTH PAf LFO1 TVA DEPTH PAf LFO2 RATE CONTROL PAf LFO2 PITCH DEPTH PAf LFO2 TVF DEPTH PAf LFO2 TVA DEPTH CC1 PITCH CONTROL CC1 TVF CUTOFF CONTROL CC1 AMPLITUDE CONTROL CC1 LFO1 RATE CONTROL CC1 LFO1 PITCH DEPTH CC1 LFO1 TVF DEPTH CC1 LFO1 TVA DEPTH CC1 LFO2 RATE CONTROL CC1 LFO2 PITCH DEPTH CC1 LFO2 TVF DEPTH CC1 LFO2 TVA DEPTH CC2 PITCH CONTROLCC2 TVF CUTOFF CONTROL CC2 AMPLITUDE CONTROL CC2 LFO1 RATE CONTROL CC2 LFO1 PITCH DEPTH CC2 LFO1 TVF DEPTH CC2 LFO1 TVA DEPTH -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] 10. 0 - +10. 0 [Hz] 0-600 [cent] -2400 [cent] -100. 0 [%] -10. 0 - +10. 0 [Hz] -600 [cent] -2400 [cent] -100. 0 [%] 0-24 [semitone] 9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] -600 [cent] -2400 [cent] -100. 0 [%] -10. 0 - +10. 0 [Hz] -600 [cent] -2400 [cent] -100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 40 40 40 40 0A 00 00 40 00 00 00 42 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 47 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 2 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 40 2x 00 40 2x 01 40 2x 02 40 2x 03 40 2x 04 40 2x 05 40 2x 06 40 2x 07 40 2x 08 40 2x 09 40 2x 0A 40 2x 10 40 2x 11 40 2x 12 40 2x 13 40 2x 14 40 2x 15 40 2x 16 40 2x 17 40 2x 18 40 2x 19 40 2x 1A 40 2x 20 40 2x 21 40 2x 22 40 2x 23 40 2x 24 40 2x 25 40 2x 26 40 2x 27 40 2x 28 40 2x 29 40 2x 2A 40 2x 30 40 2x 31 40 2x 32 40 2x 33 40 2x 34 40 2x 35 40 2x 36 40 2x 37 40 2x 38 40 2x 39 40 2x 3A 40 2x 40 40 2x 41 40 2x 42 40 2x 43 40 2x 44 40 2x 45 40 2x 46 40 2x 47 40 2x 48 40 2x 49 40 2x 4A 40 2x 50 40 2x 51 40 2x 52 40 2x 53 40 2x 54 40 2x 55 40 2x 56 12 40 2x 57 40 2x 58 40 2x 59 40 2x 5A 40 4x 23 * 00 00 01 00 00 01 00 00 01 00 00 01 00 00 02 00-7F 00-7F 00-7F 00-7F 00 - 7F CC2 LFO2 RATE CONTROL CC2 LFO2 PITCH DEPTH CC2 LFO2 TVF DEPTH CC2 LFO2 TVA DEPTH PART EFX TYPE (MSB, LSB) -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 00 00 - 7F 7F 40 00 00 00 00 00 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 This EFX type is same to EFX type of System Parameter. When this EFX type is same to EFX type of System parameter (p. [. . . ] From the above table, the value is 45 03H. B2 (B2) (B2) (B2) (B2) (B2) 64 00 65 01 06 45 26 03 64 7F 65 7F MIDI ch. 3, lower byte of RPN parameter number: 00H (MIDI ch. 3) upper byte of RPN parameter number: 01H (MIDI ch. 3) upper byte of parameter value: 45H (MIDI ch. 3) lower byte of parameter value: 03H (MIDI ch. 3) lower byte of RPN parameter number: 7FH (MIDI ch. 3) upper byte of RPN parameter number: 7FH Just Temperament (Keytone C) 0 -8 +4 +16 -14 -2 -10 +2 +14 -16 +14 -12 Arabian Scale -6 +45 -2 -12 -51 -8 +43 -4 +47 0 -10 -49 The values in the table are given in cents. Refer to the explanation of Scale Tuning (p. 12) to convert these values to hexadecimal, and transmit them as exclusive data. [. . . ]