User manual ROLLEI PREGO140

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. [. . . ] A small aperture value produces a portrait photo with an out-of-focus background. The smaller the aperture value, the more out-of-focus the background becomes. A large aperture value produces sharp images on both close objects and distant objects like landscapes. The larger the aperture value, the larger the area for sharp images. Set the mode dial to [Av] and power on the camera. Rotate the Command dial to adjust the aperture value. The aperture value and the shutter speed corresponding to that value are displayed on the LCD monitor. Compose the picture and press the shutter button down halfway, then press it down fully. Note: The larger the F value, the smaller the aperture size becomes and vice versa. 35 Photography in the Full Manual Mode [M] This mode can set the aperture and shutter speed values separately before taking a photograph. Both the aperture value and shutter speed can be changed by rotating the Command dial. Set the mode dial to [M] and power on the camera. 4. ], [ P ], [ Tv ], [ Av ], [ M ], [ ], [ ], [ ], 5. 6. [ ] and power on the camera. Use the or button to select the menu page. Use the or button to select the desired item and press the SET button. Use the or button to select the desired setting and press the SET button. This saves the settings, and returns the display to menu screen. To exit the menu screen, press the MENU button. The camera is now ready to take photographs. 39 Picture Setting The Picture Setting contains 5 items: Size, Quality, Sharpness, Contrast and Color. [2560 x 1920]: 2560 x 1920 pixels [2048 x 1536]: 2048 x 1536 pixels [1280 x 960]: 1280 x 960 pixels [640 x 480]: 640 x 480 pixels Note: In the [ pixels. ] mode, image size available in this setting is 320 x 240 pixels and 160 x 120 Quality Set the quality (compression ratio) sharpness at which the image is to be recorded. [Fine]: 1/4 compression (still image)/ 1/10 compression (video clip) [Standard]: 1/8 compression (still image)/ 1/14 compression (video clip) [Economy]: 1/16 compression (still image)/ 1/19 compression (video clip) 40 Sharpness Set the level of the image sharpness. [Hard]: Hard effect [Normal] : Normal sharpness (default) [Soft]: Soft effect Note: This function is not available in the [ ] mode. Contrast Set the contrast of the image to be photographed. [. . . ] Follow the on-screen instructions to complete the installation. After the USB driver has been installed, restart your computer. Step 2: Connecting the Camera to Your Computer 1. Connect one end of the USB cable to an available USB port on your computer. Connect the other end of the USB cable to the USB connector on the camera. [. . . ]