User manual ROLLEI SEAGULL 203

[. . . ] WARRANTY POLICY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 13 13 14 14 15 16 17 7 ¥. . . 'RW-1 7 10/5/00, 9:06 AM NAME OF PARTS 1 Built-in Flash 2 Lamp for Red-Eye-Reduction /Self-timer 3 Film Counter Window 4 Mid-roll Rewind Button 5 Self-timer Button 6 Shutter Release Button 7 Auto-focus Sensor Windows 8Auto Exposure Metering Window 9 Viewfinder Window bk Lens Cover/Lens bl Lens Cover Switch bmBack Cover Lock bn Film Take-up Spool bo Finder Eyepiece bp Flash ready monitor bq Film Rewind Shaft br Film Chamber bs Film Guides bt Tripod Socket ck Battery Chamber Cover cl Strap Eyelet cm Film Check Window cn Back Cover co Battery check lamp ATTACHING THE STRAP(Fig. Insert the loop at the end of the Strap under the Strap Eyelet. [. . . ] Push the Back Cover Lock downward to open (Fig. 5) 2. Load the film cassette into the Film Chamber and pull out enough film leader to extend past the film Leader Mark. (Fig. 6) 3. Make sure the film stays within the Film Guides and lies flat. Press the Back Cover shut so that the Back cover lock returns to its original position. No matter that the lens cover is open or close, the film will advance to the first exposure frame automatically and the exposuer counter advance to"1". * If the exposure counter does not advance, open the back cover and reload the film. * Whether there is film cassette in the camera or not, can be identified through the Film Check Window. HOLDING YOUR CAMERA(Fig. 8) · Always use both hands to steady your camera. · When holding the camera vertically always position it with the flash at the top. · Be careful not to place your fingers over the lens or flash. BATTERY CHECK LAMP(red light) When the Battery check lamp is blinking, it could finish at least one 36 exp. Please replace to new battery when you finish the last one film. · Make sure the subject is at least 0. 8m(2. 6ft) away from the camera. If you want to focus on a subject that is not in center of your picture, use the focus lock function described below. (Fig. Aim the camera at the subject you want to focus on. Press the shutter release button half way · Be careful not to press the shutter release button all the way down to avoid taking an unwanted picture. 13 12 ¥. . . 'RW-1 12-13 10/5/00, 9:06 AM 3. Keeping the shutter release button depressed recompose your picture desired. · Hold the camera steady and gently press the shutter release button fully down. · The focus lock can be canceled by lifting your finger from the shutter release button. · Be careful not to accidentally cover the Auto-focus Sensor Windows on the front of your camera, as this will cause incorrect focusing. · Keep the Auto-focus Sensor Windows clean to ensure accurate focusing. If they get dirty, they should be wiped clean with a soft cloth. REWINDING THE FILM 1. After the end of the film has been reached, the film will automatically rewind. [. . . ] 19) tamperes-with, or altered by anyone other than the manufacturer. other than for the warranty herein. we are not responsibe for loss, damage or inconvenience of any kind. A defective camera being returned under this warranty must be accompanied by a brief description of difficulties encountered and by proof of purchaser showing date of purchase. All related transportation costs and insurance will be at the owner's expense. Any alteration of this warranty cannot be made without our written approval. TYPE: Film: Lens: Focusing: Focusing Range: Shutter: Film Speed Index: Viewfinder: Automatic camera with big finder 35 mm cartridge film; 24 mm x 36 mm format (Glass) F5 27mm, 3 elements in 3 groups. 3 glasses. [. . . ]