Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLLS 402P. We hope that this ROLLS 402P user guide will be useful to you.
Lastmanuals help download the user guide ROLLS 402P.
Detailed instructions for use are in the User's Guide.
[. . . ] Refer to the owners manual of your MIDI device for the correct connections and programming configurations for this function. If you use Channel 1's OUT/CV jack, the resistance is 0 ohms in the forward position, and 100K ohms in the back position. If the Channel 2 IN/CV jack is used, the resistance is 100K ohms in the forward position, and 0 ohms in the back position. [. . . ] IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RFX Salt Lake City, UT 9/00
OWNERS MANUAL
Thank you for purchasing the RFX402P Stereo Volume/Panner pedal. The 402P is designed to provide lasting value and usefulness. It's uses are many, and include guitar, keyboard or other electronic instrument's volume control. WARNING: Due to the scissor like action of the foot pedal, there is a pinch hazard. Also, the RFX402P has a few sharp metal corners. Your RFX402P was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. Complete the Warranty Registration Card and return it to the factory.
AMPLIFIER
AMPLIFIER
CHANNEL 2
CHANNEL 1
RFX402P PAN MADE IN USA NORM
IN/CV
OUT
IN
OUT/CV
DESCRIPTION PAN/NORM SWITCH: When pressed in, the RFX402P is in Pan mode, when out, the unit acts as a volume pedal. Note: All jacks are 1/4" unbalanced. CHANNEL 1 JACKS: IN: For receiving incoming instrument or line level signals. [. . . ] When the pedal is rotated to it's back position, the left channel is on and the right channel is off. For a balanced signal level, the pedal must be placed in the middle of it's rotation. If you wish to pan a mono signal, you must use a "Y" cable to send the same signal to both Channels 1 and 2. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLLS 402P
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLLS 402P will begin.
