User manual ROLLS 962

[. . . ] In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized Service Center, or any use violative of instructions furnished by us. This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. [. . . ] To achieve the best results from your RFX962, please read the following manual carefully. We sincerely hope you enjoy this product. Your RFX962 was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. Complete the Warranty Registration Card and return it to the factory. DESCRIPTION FOOTPAD 1: Switches the chorus effect between Speed 1 and Speed 2. FOOTPAD 2: Switches the RFX962 between Chorus and bypass modes. CONNECTION AC ADAPTER INPUT: For use with the optional ROLLS PS27 Power Supply; 12 VDC, 150 mA, tip negative. INSTRUMENT INPUT: 1/4" phone jack for an instrument level signal. OUTPUTS: 1/4" phone jacks to be connected to other pedals, a recording device, or an amplifier. NOTE: Unique to the RFX series of effects pedals is the ability of the output jack to be used as a headphone output. SAMPLE SETTINGS Medium Leslie: Use Footpad 1 to switch between chorus speeds DEPTH SPD 1 CHORUS RATE SPEED 1 SPEED 2 Wild Leslie: Use Footpad 1 to switch between speeds DEPTH RATE SPEED 1 SPEED 2 TWIN SPIN INSTRUMENT CHORUS MODEL RFX962 DEPTH RATE SPEED 1 SPEED 2 BATTERY COM PARTM ENT AC ADAPTER IN P U T OUTPUT 1 OUTPUT 2 Light Chorus: Using SPD 1 only. SPECIFICATIONS Power Source: Current Draw: Speed Rate: Rate Control: Avg. Delay Time: I/O Connectors: Size (W x H x D): Weight: . OOTPAD 1 . OOTPAD 2 IN S T R U M E N T IN P U T DEPTH RATE SPEED 1 SPEED 2 Full Chorus: Using SPD 1 only. CONTROL DESCRIPTIONS SPD 1 LED: Indicates which speed control is selected. When lit, the modulation speed is controlled by SPD1, otherwise the modulation speed is controlled by SPD2. [. . . ] SPEED 2: Controls the second speed of the chorusing effect, when the SPD1 led is off. 9V battery Rolls PS27 adapter 20 mA 2Hz - 14Hz 200mS - 5 Sec. 7mS 1/4" TS unbalanced 3" x 1. 2" x 4. 8" 1 lb. DEPTH RATE SPEED 1 SPEED 2 BATTERY REPLACEMENT The battery will need to be replaced when the unit will not switch on and off, or when the SPD 1 and CHORUS LEDs will not go completely out. To change the battery, remove the battery compartment cover and replaced with a 9-volt (alkaline preferred) battery. [. . . ]