User manual ROLLS MP13

[. . . ] MICROPHONE PREAMP MP13 MINI-MIC Mini-Mic Preamp BALANCED OUTPUT BALANCED MP13 INPUT UNBAL LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. [. . . ] IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. MP13 MINI-MIC PREAMP MICROPHONE PREAMP · XLR and 1/8" Inputs · XLR and 1/4" Outputs · Gain Control · Clip LED indicator · +21 Volt Phantom Power The MP13 is designed to provide simple, inexpensive microphone preamplification for a variety of applications. The unit has both XLR and 1/4" inputs and outputs, a single Gain control with a Clip LED indicator, and Phantom powering is included for use with a condenser microphone. The 1/4" output is specially designed for use as either a mono unbalanced output, or a stereo headphone output. Rolls Corporation Salt Lake City, UT 2/02 6 GAIN dB 50 clip Owners Manual PWR DC IN 12 VDC + - PHANTOM POWER pwr UNBAL INTRODUCTION Thank you for purchasing the ROLLS MP13 MINI-MIC Microphone Preamp. The MP13 uses a servo balanced instrumentation amplifier for studio grade performance in a small package. This equates to a 40db better common mode rejection ratio (CMRR) than transistor inputs used by most companies on mic inputs. The clearer sound with more "air" puts the MP13 in a class with much higher priced units. FEATURES · XLR and 1/8" Mic Inputs · XLR and 1/4" Outputs · Gain Control · Clip LED indicator · 1/4" Output Drives Stereo Headphones · +21 Volt Phantom Power - available for 1/8" microphones DESCRIPTION INPUT: 1/4" and female XLR jack for signal input. OUTPUT: 1/4" and male XLR jack for signal output. May be connected to stereo headphones for personal monitoring. POWER: Sleeve positive barrel jack for connection to the AC power adapter. [. . . ] PWR: LED for indicating power is applied to the MP13. SPECIFICATIONS Connectors: Inputs; Outputs: Input Impedance: Max Input Level: Max Gain: Phase Shift: EIN: THD: IMD (SMPTE) CMRR: Phantom Power: Power: Weight: Size: XLR, 1/8" TRS balanced Mic In XLR balanced, 1/4" unbal. <. 01% <. 01% > 80dB +21 Volts, 6 mA 12 VDC adapter 1 lbs (. 45Kg) 3. 4" x 4. 2" x1. 4" SCHEMATIC Mini-Mic Preamp clip MP13 GAIN dB 50 PHANTOM POWER pwr 6 [. . . ]