User manual ROLLS MX44S

[. . . ] MX44s MINI-MIX IV · Four stereo inputs to one stereo output · 1/4" and 1/8" TRS Stereo high-impedance inputs · 1/4" and 1/8" TRS Stereo high-impedance output · Battery or AC operation LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. Products returned to us or to an authorized Service Center must be accompanied by a copy of the purchase receipt. [. . . ] 9V battery, or Rolls PS27 12VDC adapter 12 VDC 100mA (optional) 6"w x 3. 25"h x 1. 25"d 1. 5lb (. 5Kg) Rolls Corporation Salt Lake City, UT 1/06 Owners Manual INTRODUCTION Thank you for your purchase of the MX44s 4 Channel Stereo Mixer. This unit is designed to mix up to four stereo line-level signals such as instruments, CD players, DVD players, MP3 players, laptop computers, etc. WARRANTY REGISTRATION For complete warranty information, please visit our website at www. rolls. com and click on the "Register Your Warranty Here" text, and follow the link and instructions. DESCRIPTION OPERATION To connect various devices to the MX44s, you'll need the proper cables. - Connecting most CD, Cassete, and Video units will require a stereo RCA to stereo 1/4" or 1/8" (3. 5mm) cable. A stereo plug consists of tip, ring and sleeve connections - shown in Fig. - Most stereo instruments have individual Right and Left outputs. Therefore, you'll need an "Insert" type cable. This cable has two 1/4' TIp-Sleeve jacks on one end to connect to the stereo instrument, and a Tip-Ring-Sleeve stereo jack on the other end to connect to the MX44s. For assistance on cable selection, contact your local professional audio dealer. - Some devices have stereo 1/4" outputs identical to the inputs of the MX44s. These devices will require a 1/4" TRS stereo to 1/4" or 1/8" TRS stereo cable. NOTE: PLUGGING A TIP-SLEEVE MONO PLUG INTO THE MX44s WILL NOT DAMAGE THE UNIT. [. . . ] TOP PANEL pwr: LED - Indicates that the MX44s is connected to a power source, and the unit is on. 1 - 4: Volume controls - adjust the level of the signals coming from Inputs 1 - 4. FRONT PANEL IN 1 - 4: 1/4" and 1/8" (3. 5mm)Tip-Ring-Sleeve stereo unbalanced jacks for connection to line level devices. SCHEMATIC Tip - Ring - Sleeve Fig. [. . . ]