User manual ROLLS RM203

[. . . ] In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized Service Center, or any use violative of instructions furnished by us. This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. [. . . ] If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. Please complete the Warranty Registration Card and return it to the factory. 2 2 3-4 5 6 Back cover R102 2K C101 1U R103 47K C102 120PF D101 LDRR R2 10K R3 1K RCAX4 J21A REC OUT RCAX4 J21B REC OUT R15 100K 6 SPECIFICATIONS Input Impedance: Output Impedance: Max Input Level: Phase Shift: Connectors: Max Gain: S/N Ratio: THD IMD (SMPTE) Power Weight: Size: 10 k unbal. 50 bal R DESCRIPTION FRONT PANEL 1 2 3 4 5 6 7 8 9 10 CLIP PWR HEADPHONE/ AUX OUT 0 10 LEVEL CLIP 0 10 CLIP LEVEL 0 10 CLIP LEVEL 0 10 CLIP LEVEL 0 10 CLIP LEVEL 0 10 CLIP LEVEL 0 10 CLIP LEVEL 0 10 LEVEL CLIP 0 10 LEVEL CLIP 0 10 CLIP LEVEL 0 10 TAPE IN 0 10 AUX RETURN 0 10 MASTER LEVEL L 10 0 R L 10 0 R L 10 0 R L 10 0 R L 10 0 R L 10 0 R L 10 0 R L 10 0 R L 10 0 R L 10 0 +18 dBV < 10 deg. 20 Hz - 20 kHz 1/4" and RCA 26 dB Line 26 dB Aux >90 dB < . 003% < . 003% 120 VAC 50-60 Hz, 15 W 7 lbs (3kg) 19" x 1. 75" x 6. 5" (48cm x 4. 5cm x 17cm) RM203 BAL AUX BAL AUX BAL AUX BAL AUX BAL AUX BAL AUX BAL AUX BAL AUX BAL AUX BAL AUX Note: Channels One through Ten are identical. Channel Section Bal: Adjusts the relative level of the channel signal to the Right and Left outputs. Aux: Adjusts the amount of signal sent to the Auxiliary Output Level: Adjusts the overall signal level of the channel. Clip: When lit, indicates clipping of excessive level into the channel. Master Section Tape In: Adjusts the amount of input signal from the rear panel Tape In jacks. Aux Return: Controls the amount of signal received at the stereo Aux Return jacks. Master Level : Controls the overall output level of the RM203. Headphone/Aux out: 1/4" TRS stereo jacks for monitoring the master right and left signals, also may be used as an alternative stereo output for connecting to another stereo amplifier. PWR: Indicates that the RM203 is connected to an AC outlet and is on. REAR PANEL MODEL RM203 S/N 203OUT TAPE IN R MONO MONO MONO MONO MONO MONO MONO MONO MONO MONO POWER 12 VAC MADE IN THE U. S. A. RIGHT OUT LEFT OUT AUX RIGHT/MON LEFT SEND AUX RTN AUX RTN RIGHT L LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT 10 9 8 7 6 5 4 3 2 1 Master Outputs Right and Left Out: 1/4" TRS balanced main output jacks. For connection to an amplifier, recording device or signal processor. Right and Left Aux Return: 1/4" unbalanced jack, for connection to the right and left outputs of a signal processor, or they may be used as auxiliary inputs. Aux Send: 1/4" unbalanced jack, for connection to a signal processor input such as a multi-effects processor. [. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING: To reduce the risk of electric shock or fire do not expose this device to rain or moisture. RISQUE DE CHOC - NE PAS ENLEVER The RM203 is designed to receive line-level signals, thus a microphone or other low input signal will be insufficient to drive the RM203 inputs. Connect the outputs of each instrument or module via a 1/4" cable. AUXILIARY SEND/STEREO RETURN CONNECTION EXAMPLE MODEL RM203 S/N 203OUT TAPE IN R MONO MONO MONO MONO MONO MONO MONO MONO MONO MONO POWER 12 VAC MADE IN THE U. S. A. RIGHT OUT LEFT OUT AUX SEND RIGHT LEFT AUX RTN AUX RTN RIGHT L LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT 10 9 8 7 6 5 4 3 2 1 MULTI-EFFECTS PROCESSOR INPUT RIGHT LEFT OUTPUTS Connect the RM203 Right and Left Outputs to an amplifier via two balanced TRS 1/4" jacks (two TS unbalanced jacks will work as well). Connect 1/4" unbalanced cables to the Aux Send to the Input of the signal processor, and connect each signal processor output to its corresponding Aux Return jack. [. . . ]