User manual ROLLS SX21

[. . . ] TINY TWO-WAY CROSSOVER TINY TWO-WA Y CROSSOVER TINY TWO-WAY XOVER LOW LEVEL FREQUENCY 375 250 100 500 1K 75 1. 5 SX21 FREQUENCY LOW OUTPUT 2. 5K SPECIFICATIONS Input Impedance: Output Impedance: Headroom: Power Requrements: SX21 50 INPUT INPUT INPUT 10 CLIP LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. [. . . ] This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SX21 Tiny Two-Way Crossover The SX21 is a unique frequency dividing device for small sound reinforcement applications. The unit features a 24 dB/Octave rolloff rate, a frequency dividing range of 50Hz to 2. 5kHz, and an external power supply for noise reduction. All this in a compact package with a compact price. · 24 dB/Octave rolloff · 1/4" unbal. Input and Outputs · 50Hz to 2. 5 kHz crossover range (may be factory modified) · External power supply for low noise operation Rolls Corporation Salt Lake City, UT 8/01 Size: Weight: SX21 0 10K9 1K9 +10 dBV 12 - 16 VDC, 150 mA; Rolls part number PS27 4. 25" x 3. 625" x 1. 5" 1 lb. 2K Owners Manual HIGH LEVEL DC IN 12 VDC HIGH LEVEL + - HIGH OUTPUT LOW LEVEL 0 10 0 10 PWR INTRODUCTION Thank you for your purchase of the SX21 Tiny Two-Way Crossover. Please review this manual to get the best performance from this unit. DESCRIPTION FRONT PANEL INPUT LOW LEVEL HIGH LEVEL FREQUENCY 375 250 100 500 1K 75 1. 5 2K 0 10 CLIP 50 2. 5K 0 10 0 10 PWR OPERATION. Connect the Input of the SX21 to the output of a mixer or other device that has the signal to be divided. The High and Low Outputs of the SX21 should be connected to the proper amplifier and speaker combination. Check speaker specifications to ensure that the speakers are receiving the proper frequencies. Shown below is an example for connecting the SX21. From output of mixer or other signal source to be divided SX21 TINY TWO-WAY XOVER INPUT: Adjusts the input level to the SX21. FREQUENCY: Selects the crossover frequency from 50Hz to 2. 5kHz. LOW LEVEL: Adjusts the amount of output signal from the LOW OUT jack. [. . . ] LOW OUT: 1/4" TS unbalanced jack containing the signal of frequencies below the crossover frequency. HIGH OUT: 1/4" TS unbalanced jack containing the signal of frequencies above the crossover frequency. LOW LEVEL HIGH LEVEL [. . . ]