User manual ROLLS VP29

[. . . ] LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. [. . . ] Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY · Converts RIAA Phono signals OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states to Line Level do not allow the exclusion or limitation · Works well with magnetic of special, incidental or consequential phono pickups damages so the above limitation or exclusion may not apply to you. This · Stereo RCA and 1/4" outputs warranty gives you specific legal rights, and you may also have other rights Phono players require special which vary from state to state. VP29 Phono Preamp VP29 Phono Preamp PWR INPUT 12 - 16 VDC INPUT R L OUTPUT R L OUTPUT + - L R VP29 equalization because of the frequency response of recording on vinyl. The VP29 equalizes and amplifies the phono signal to a clean, and full line level for professional amplification. PHONO PREAMP OWNERS MANUAL Rolls Corporation Salt Lake City, UT 11/03 Thank you for your purchase of the Rolls VP29 Phono Preamp. The VP29 is designed to amplify an RIAA equalized phono signal to a Hi-Fi level signal, and it works well with magnetic pickups. Unpack and Inspect the VP29 package Your VP29 was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. [. . . ] Pwr Supply SCHEMATIC PWR INPUT SPECIFICATIONS I/ O Connectors: Input Sensitivity: Input Capacitance: Input Impedance: Output Impedance: Max Output Level: Frequency Response: THD S/N Ratio: PWR: Size: Weight: Indicator: RCA, 1/4" TRS Stereo 35 dBV gain @ 1kHz, 47k Ohms Input Z 5pf + cable capacitance 50k Ohms 1 K Ohms >10dB @ 1kHz at at 1% dist. + / - 1. 5dB 20 Hz - 20 kHz (ConformstoRIAAEqualizationCurve) . 02% @ 1 kHz >80 dB unweighted 12 - 18 VDC 3. 25 x 2 x 1. 5 1 lb 1 Power LED [. . . ]