User manual ROMMELSBACHER CTS 2000/IN

[. . . ] Touch key "+" to raise temperature setting Touch key for adjustable direct selection of programme/temperature levels Touch key "Yogurt" ­ 42 °C Touch key "Sous Vide" ­ 60 °C Touch key "Slow Cook" ­ 80 °C Touch key "Boil" ­ 100 °C Touch key "Fry" ­ 180 °C Touch key "Roast" ­ 220 °C H Sensortaste , , Power" für den Modus , , Leistungsstufen" Touch key "Power" for "power level" mode I Sensortaste , , Timer" für den Modus , , Laufzeiteinstellung" Touch key "Timer" for "timer setting" mode J Sensortaste , , Boost" für den Modus , , PowerBoost" Touch key "Boost" for "PowerBoost" mode Touch key "Lock" for key lock L Sensortaste , , ON/STANDBY" für den Hauptschalter Touch key "ON/STANDBY" for main switch 25 Safety advices for using the appliance. Read all safety advices and instructions. Non-observance of the safety advices and instructions may cause electric shock, fire and/or bad injuries! general safety advices: · Children from the age of 8 and persons not having the knowledge or Experience in operating the appliance or having handicaps of physical, sensorial or mental nature must not operate the appliance without supervision or instruction by a person, responsible for their safety. [. . . ] For switching-on touch the touch key"ON/STANDBY". Tapping the touch key is confirmed by a signal tone and both displays show "---". The pilot lamp above of the touch key flashes. Now decide on the cooking mode you would like to work with (either "power level" or "temperature level" mode). NOTE: If there is no further activation within 60 seconds after switch-on, the control will switch back to the "Standby" mode. The appliance automatically switches to power level "6". Tapping the touch key is confirmed by a signal tone, while the right display shows "6". The pilot lamp above of the touch key "ON/STANDBY" is lit continuously. ) How to increase or reduce the selected power level · By tapping the touch key "+" in the right area of the display, the power can be increased up to level "10". By tapping the touch key "-" in the right area of the display, the power can be reduced down to level "1". NOTE: The setting can be made in quick succession by continuously touching the touch key. The values of power levels indicated below are reference values and apply to standard steel pots with 20 cm Ø. NOTE: A sensor in the centre of the cooking zone checks the temperature at the bottom of the cookware. The regulation will only function properly if the cookware covers this sensor correctly. the maximum permitted temperature in "power level" mode is 180 °C. If the sensor measures a higher value, there is no power output until the temperature has dropped down again to a tolerable value!For temperatures above 180 °C, please use the "temperature level" mode. The control of the direct selection programmes is designed in such a way that the temperature is as accurate as possible and thus overheating can be avoided. Therefore, warming can take a little bit time. Due to the direct measuring of temperature the control of temperature is working with a high accuracy. The cookware in use, the type and amount of the food to be cooked and the ambient conditions can, however, have an impact on the actual temperature inside the cookware. Thanks to the possibility of setting the temperature precisely, this can be compensated very easily. [. . . ] Always keep the opening clean, so that any overflowed food can flow off via the sensor. Never immerse the appliance in water and do not use steam jet cleaners. Make sure that no water or steam can penetrate from below. If any dirt is visible in the area of the ventilation slots, remove it from the outside with a vacuum cleaner. [. . . ]