User manual ROSE DISPLAYS ANOCONNECTOR WITH ANOQUICK

[. . . ] AnoConnectorTM Parts Instruction Sheet AnoQuick 12A300 AnoConnectors 06-2930 Instructions for Hanging Step 1 Push one AnoConnector into one end of first AnoQuick rail. [. . . ] 3 Figure 3 Important note: It is very important to insert single barb side first. The middle barb acts as a stop for the AnoQuick rail. The AnoConnectorTM is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoConnector Incept-9. 9. 02 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com AnoConnectorTM Parts Instruction Sheet AnoQuick 12A300 AnoConnectors 06-2930 Instructions for Hanging Step 1 Push one AnoConnector into one end of first AnoQuick rail. Be sure to start with single barb side of the AnoConnector going into rail first. Push in until it stops at the middle barb. 1 Note: The AnoConnector can also be used to connect lengths of AnoGotcha and AnoMulti. Figure 1 Step 2 Repeat with second AnoConnector going into back slot of first AnoQuick rail. 2 Figure 2 Step 3 Push second AnoQuick holder onto first assembly. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ]