User manual ROSE DISPLAYS ANOGOTCHA ROUND WITH WINDOW MOUNTS

[. . . ] AnoGotchaTM Parts Instruction Sheet AnoGotcha Shell 12AT300 T-Top Gotcha 12GT100 Window Mounts 20-0038 End Caps 06-5525 Instructions for Hanging Step 1 Insert T-Top Gotcha Holder into AnoGotcha Shell. [. . . ] Make sure glass and suction cups are clean and free of dust and dirt. 5 Important note: For best performance when first applied and occasionally thereafter, press the middle of the cup to "burp" extra air out. Figure 5 The AnoGotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoGotchaWindowMounts 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-9. 10. 02 AnoGotchaTM Parts Instruction Sheet AnoGotcha Shell 12AT300 T-Top Gotcha 12GT100 Window Mounts 20-0038 End Caps 06-5525 Instructions for Hanging Step 1 Insert T-Top Gotcha Holder into AnoGotcha Shell. 1 Step 2 Snap the AnoGotcha Holder completely open so the hinge is turned up as far as possible. Insert poster into holder until top of poster meets top of holder. To close snap the AnoGotcha Holder shut. 2 With large or curling graphics, it may be easier to insert graphic at one end and slide into holder from one end to another. Figure 1 Figure 2 Step 3 Slide Wally Window Mount into top rail of the Improved AnoGotcha holder. [. . . ] Part #02INSAnoGotchaWindowMounts Incept-9. 10. 02 [. . . ]