User manual ROSE DISPLAYS ANOQUICK ROUND WITH WINDOW MOUNTS

[. . . ] AnoQuickTM Sign Mounting Systems for Windows Parts Note: Use only with graphics mounted on 3/16" foamboard or other similar thickness. Can also use a folded edge thinner substrate. AnoQuick 12A300 Window Mounts 20-0038 End Caps 06-5525 Instructions for Hanging Step 1 Prepare edges of graphic by placing the graphic on a tabletop with one edge at the table edge. [. . . ] 3&4 Step 4 Push end caps into place. 5 Figure 3 Step 5 Suspend poster. Make sure glass and suction cups are clean and free of dust and dirt. Important note: For best performance when first applied and occasionally thereafter, press the middle of the cup (on the cap) to "burp" extra air out. Figure 4 Figure 5 The AnoQuickTM is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoQuickWindowMounts 35 Congress Street, Salem, MA 01970 Tel# 1-800-631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-9. 12. 02 AnoQuickTM Sign Mounting Systems for Windows Parts Note: Use only with graphics mounted on 3/16" foamboard or other similar thickness. Can also use a folded edge thinner substrate. AnoQuick 12A300 Window Mounts 20-0038 End Caps 06-5525 Instructions for Hanging Step 1 Prepare edges of the graphic by placing the graphic on a tabletop with one edge at the table edge. Using the AnoQuick Holder, run it across the graphic edge, crushing it slightly. 1 Step 2 Starting at one corner, push the holder onto the graphic. Work your way down the holder tapping it down firmly to seat the graphic fully. 2 Figure 1 Figure 2 Step 3 Slide the Window Suction Cups into the top rail of the AnoQuick Holder. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoQuickWindowMounts Incept-9. 12. 02 [. . . ]