User manual ROSE DISPLAYS GIRDER GRIPPER

[. . . ] Girder Gripper Components TM Instructions For open ceilings or truss beams Girder Gripper Omni Head OneUp Double Hook OneUp Clip Sign Holder To install Step 1 Assemble poster, sign holders, hook and Girder Gripper. [. . . ] Lock the RoPole joints securely. Step 3 Raise the Girder Gripper above the spot on the beam where you want to hang the sign. 2) Firmly pull the RoPole straight down. Omni Head Figure 3 To remove Step 1 Rest the RoPole on the floor, extend to ceiling and firmly lock the joints. Step 2 Capture the bottom of the Girder Gripper with the Omni head. 3) Capture bottom of Girder Gripper Step 3 Push Girder Gripper up and rotate 1/4 turn. 4) Slowly lower the assembly. Figure 4 Girder Gripper Truss beam Omni Head Helpful hints · Practice makes perfect!· Those not yet familiar with the RoPole should practice installing and removing the anchor from the ceiling without a poster a few times first. · Keep the RoPole vertical and directly beneath the anchor. The OneUp and the RoPole are patented and registered trademarks of Rose Displays, Ltd. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ]