User manual ROSE DISPLAYS GOTCHA WITH ADHESIVE

[. . . ] Gotcha with Adhesive Instruction Sheet Parts Gotcha with Adhesive Installation Instructions Step 1 Clean surface first. [. . . ] Please allow adhesive to cure for 30 minutes before changing graphics. The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSGotcha withAdhesive 35 Congress Street, Salem MA 01970 Tel# 1-800-631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Rev. 7. 31. 02 Figure 1 Figure 2 Peel paper backing off adhesive strip Gotcha with Adhesive Instruction Sheet Parts Gotcha with Adhesive Installation Instructions Step 1 Clean surface first. Be sure the surface that you are applying the Gotcha with Adhesive to is dry and free of dust. Note: It is easier to open and close the Gotcha by starting at one end and working your way down the holder. Step 3 Peel paper backing off of adhesive (Fig. Step 4 Properly align Gotcha with Adhesive before applying pressure. [. . . ] Part #02INSGotcha withAdhesive Figure 1 Figure 2 Peel paper backing off adhesive strip Rev. [. . . ]