User manual ROSE DISPLAYS GOTCHA WITH V CLIP

[. . . ] Gotcha® Parts Instruction Sheet Gotcha 12G100 Gotcha Clip 12G100 V Clip 12G100 Jet Wire 12G100 Instructions for Hanging Step 1 Place poster on a flat surface. [. . . ] 2 & 3 Slowly pull sign down to desired level. Jet Wire stretches to 48". Figure 2 Figure 3 Important note: Please save and reuse the Gotcha Holder, V Clips and Gotcha clips for future projects. The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #99INSGOVCLP 21 Lime Street, Marblehead, MA 01945 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-3. 1. 99 Gotcha® Parts Instruction Sheet Gotcha 12G100 Gotcha Clip 12G100 V Clip 12G100 Jet Wire 12G100 Instructions for Hanging Step 1 Place poster on a flat surface. Snap the Gotcha open and insert poster (top and bottom). 1 Note: It is easier to open and close the Gotcha by starting at one end, and working your way down the holder. Step 2 Insert Gotcha Clips into slot on backside of the top Gotcha only. (You should hear a "SNAP" when the clips are inserted properly). 2 Note: For best results, place the clips 1/3 of the way in from each end on the top Gotcha holder. Figure 1 Step 3 Attach V Clip to ceiling grid. Step 4 Attach one end of Jet wire to V Clips and the other into the Gotcha clips. [. . . ] Part #99INSGOVCLP 21 Lime Street, Marblehead, MA 01945 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-3. 1. 99 [. . . ]